Panasonic PT-L795U manual Location and function of each part, Remote control unit, Front view

Page 7

Location and function of each part

Remote control unit

<Front view>

LIGHT button (page 10)

This button is used to illuminate the remote control unit buttons.

ENTER button

This button is used to accept and to activate items selected in the on-screen menu screens.

Arrow ( , , and ) buttons

These button; are used to select and adjust items in the on-screen menu screens.

MENU button

This button is used to display and clear the MENU screen and to return to a previously-displayed screen.

MUTE button (pages 24 and 37) This button is sued to momentarily cancel the output of sound from the speakers. The functioning of this button can be changed so that it can be used to cancel both sound and picture simultaneously.

POWER button (page 13)

This button is used to turn the projector power supply on and off.

FREEZE button (page 23)

This button is used to momentarily freeze projection so that a still picture is displayed.

STD (standard) button (pages 23 and 33) This button is used to return all picture adjustment values to the standard setting values which were made at the time of shipment from the factory.

When the POINT ZOOM function is being used, this button functions to switch the enlargement ratio.

VOL +/- buttons (page 23)

These buttons are used to adjust the volume of sound coming from the built-in speakers or to adjust the sound level of the signals being output from the AUDIO OUT terminals.

RGB button (page 20)

This button is used to switch the selected input source between RGB 1 and RGB 2.

VIDEO button (page 20)

This button is used to switch the selected input source between VIDEO and S-VIDEO.

Pointer button (page 40)

When the projector is connected to a personal computer by means of the accessory or optional mouse cable, this button can be used to move the cursor in place of the computer’s mouse.

CLICK 2 button (page 40)

<Side view>When the projector is connected to a personal computer by means of the accessory or optional mouse cable, this button operates in the same way as the right button on a standard mouse with two buttons.

Remote control signal transmitter (page 40) The remote control signals are transmitted from both the front and the sides. Face this section toward the remote control signal receptor of the projector to operate the projector.

Click 1 button (page 40)

This button corresponds to the button on a single-button mouse, or to the left button on a standard mouse with two buttons.

Battery compartment cover (page 9)

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents LCD Projector Features ContentsDear Panasonic Customer Important Safety Notice If problems occur during use Precautions with regard to safetySetting-up When using the projectorDo not look into the lens while the projector is being used When using the projectorCleaning and maintenance Take particular care when replacing the lamp unitWipe the cabinet with a soft, dry cloth Precautions on handlingAbout condensation Location and function of each part Remote control unitFront view Top and front ProjectorSide terminal board Back, bottom and right viewInserting the batteries Before using the remote control unitDo not do any of the following Screen Projector Operating range of the remote control unitIf facing the remote control unit toward the screen Illuminating the remote control unit buttonsCount Down Refer to Menu operation guideVideo Impose Point Zoom Refer toOptions PositionAudio Language Refer toPower button Main Power switch Turning the power on and offTurning on the power Turning off the powerScreen requirements Screen characteristics referenceStandard setting-up dimensions Standard setting-up positionsProjection distance L Maximum Minimum Adjusting the position of the projected picture Adjuster button Adjustable legs Setting the projector up horizontallyRetracting the adjustable legs Adjustment procedureAdjustment procedure for direct adjustment Adjusting the lensRear mounting Setting-up positions and changing the projection methodSetting procedure Front mountingPress the Video button Changing the input signalProjector Remote control unit Basic operationSvga XGA Mxga Sxga MAC16 MAC21 Hdtv RGB signals that can be inputDisplay mode name VGA400 VGA460 Signal dataPAL PAL-M PAL-N Secam Operating procedureAuto Ntcs NTSC4.43Freezing the picture Adjusting the volumeSelecting the picture mode Adjusting the picture to the desired setting BAL R BAL G BAL B Adjustment RangeAdjustment procedure for volume adjustment Adjusting the sound to the desired settingCorrecting the picture position automatically Correction procedureAdjustment procedure for horizontal position adjustment Adjusting the picture positionWhen adjusting the horizontal position H-POSI When adjusting the vertical position V-POSIFor overscanning Adjusting the video sizeFor underscanning About dot clock adjustment Using the video impose function Using other useful functionsEnlarging part of the input picture Disabling the Power button of the remote control unit Changing the on-screen display language Setting procedure To change the language to GermanUsing the lens retracting function Using the power save functionSetting procedure VCR System configuration exampleExample of connection to audio-visual equipment Audio system Laser disc playerSUB HD Example of connection to a computerSUB Operation Wireless mouseAbout the Macintosh adapter Example of connectionBasic format Using the serial connectorPin layout and signal names for Serial connector Communication SettingsCable specifications Control commandsPossible cause IndicatorsLamp indicator Temp indicator Indicator name Indicator display ProblemCleaning the air filter Clean the air filter and the air filter clamps Replacing the lamp unit Lamp unit replacement periodLamp unit cover Fixing screw for the lamp unit cover Replacement procedurePage Before asking for service, check the following points RGB HD/SYNC RGB OUT Audio Video Audio in L-R SpecificationsFCC Trademark AcknowledgementsDimensions
Top Page Image Contents