Panasonic PT-L795U manual Disabling the Power button of the remote control unit

Page 35

Turning off the input signal display and the operable button guide display

The input signal display when the input source is switched and the operable button guide displays which appear in the menu screens and the setting and adjustment screens can be prevented from being displayed by turning off the on-screen display by the following procedure.

Setting procedure

1.Press the MENU button. The MENU screen will be displayed.

2.Use the “ “ and “ ” arrow buttons to move the cursor to “OPTION”.

3.Press the ENTER button. The OPTION screen will be displayed.

4.Use the “ “ and “ ” arrow buttons to move the cursor to “INPUT DISP”.

5.Use the “ ” and “ ” arrow buttons to switch the setting to OFF.

If the setting is switched to ON, the input signal names and operable button guide displays will appear on the screen. (Factory default setting)

NOTE:

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

Disabling the POWER button of the remote control unit

The POWER button on the remote control unit can be disabled to prevent the chance of turning the power off by mistake when using the remote control unit. This setting can be made by following the procedure given below.

Setting procedure

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “OPTION”.

3.Press the ENTER button to display the OPTION screen.

4.Press the “ ” and “ ” buttons to select “REMOTE POWER”.

5.Press the “ ” and “ ” buttons to select “OFF”.

If this is set to “ON”, the POWER button on the remote control unit can be used to turn the power on and off. (Factory pre-setting)

NOTE:

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

3 4

Image 35

Contents LCD Projector Dear Panasonic Customer ContentsFeatures Important Safety Notice If problems occur during use Precautions with regard to safetySetting-up When using the projectorDo not look into the lens while the projector is being used When using the projectorCleaning and maintenance Take particular care when replacing the lamp unitAbout condensation Precautions on handlingWipe the cabinet with a soft, dry cloth Front view Remote control unitLocation and function of each part Top and front ProjectorSide terminal board Back, bottom and right viewDo not do any of the following Before using the remote control unitInserting the batteries Screen Projector Operating range of the remote control unitIf facing the remote control unit toward the screen Illuminating the remote control unit buttonsCount Down Refer to Menu operation guideVideo Impose Point Zoom Refer toOptions PositionAudio Language Refer toPower button Main Power switch Turning the power on and offTurning on the power Turning off the powerScreen requirements Screen characteristics referenceProjection distance L Maximum Minimum Standard setting-up positionsStandard setting-up dimensions Adjusting the position of the projected picture Adjuster button Adjustable legs Setting the projector up horizontallyRetracting the adjustable legs Adjustment procedureAdjustment procedure for direct adjustment Adjusting the lensRear mounting Setting-up positions and changing the projection methodSetting procedure Front mountingPress the Video button Changing the input signalProjector Remote control unit Basic operationSvga XGA Mxga Sxga MAC16 MAC21 Hdtv RGB signals that can be inputDisplay mode name VGA400 VGA460 Signal dataPAL PAL-M PAL-N Secam Operating procedureAuto Ntcs NTSC4.43Freezing the picture Adjusting the volumeSelecting the picture mode Adjusting the picture to the desired setting BAL R BAL G BAL B Adjustment RangeAdjustment procedure for volume adjustment Adjusting the sound to the desired settingCorrecting the picture position automatically Correction procedureAdjustment procedure for horizontal position adjustment Adjusting the picture positionWhen adjusting the horizontal position H-POSI When adjusting the vertical position V-POSIFor underscanning Adjusting the video sizeFor overscanning About dot clock adjustment Using the video impose function Using other useful functionsEnlarging part of the input picture Disabling the Power button of the remote control unit Changing the on-screen display language Setting procedure To change the language to GermanUsing the lens retracting function Using the power save functionSetting procedure VCR System configuration exampleExample of connection to audio-visual equipment Audio system Laser disc playerSUB Example of connection to a computerSUB HD Operation Wireless mouseAbout the Macintosh adapter Example of connectionBasic format Using the serial connectorPin layout and signal names for Serial connector Communication SettingsCable specifications Control commandsPossible cause IndicatorsLamp indicator Temp indicator Indicator name Indicator display ProblemCleaning the air filter Clean the air filter and the air filter clamps Replacing the lamp unit Lamp unit replacement periodLamp unit cover Fixing screw for the lamp unit cover Replacement procedurePage Before asking for service, check the following points RGB HD/SYNC RGB OUT Audio Video Audio in L-R SpecificationsFCC Trademark AcknowledgementsDimensions