Panasonic PT-L795U Adjusting the picture position, When adjusting the horizontal position H-POSI

Page 30

Adjusting the picture position

If the picture is not correctly positioned within the display area of the screen so that part of the edge of the picture does not appear, adjust the position of the picture.

The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.

Adjustment procedure <for horizontal position adjustment>

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “POSITION”.

3.Press the ENTER button to display the POSITION screen.

4.Press the “ ” and “ ” buttons to select “H-POSI”.

To adjust the vertical position of the picture, select “V-POSI” instead.

5. Press the ENTER, “ ” or “ ” button to display the H-POSI individual adjustment screen.

6. Continue pressing the “ ” and “ ” buttons to adjust the H-POSI setting.

	The current setting will be displayed on the screen by numerals and a bar.
	Adjustment func-
	tion display
	Numeric adjustment	Bar display
	level display	Bar display
	level display

<When adjusting the horizontal position (H-POSI)>

If the “ ” button is pressed, the picture moves to the right.

If the “ ” button is pressed, the picture moves to the left.

<When adjusting the vertical position (V-POSI)>

If the “ ” button is pressed, the picture moves up.

If the “ ” button is pressed, the picture moves down.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the POSITION screen.

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

29

Image 30

Contents LCD Projector Contents FeaturesDear Panasonic Customer Important Safety Notice When using the projector Precautions with regard to safetySetting-up If problems occur during useTake particular care when replacing the lamp unit When using the projectorCleaning and maintenance Do not look into the lens while the projector is being usedPrecautions on handling Wipe the cabinet with a soft, dry clothAbout condensation Remote control unit Location and function of each partFront view Projector Top and frontBack, bottom and right view Side terminal boardBefore using the remote control unit Inserting the batteriesDo not do any of the following Illuminating the remote control unit buttons Operating range of the remote control unitIf facing the remote control unit toward the screen Screen ProjectorPoint Zoom Refer to Menu operation guideVideo Impose Count Down Refer toLanguage Refer to PositionAudio OptionsTurning off the power Turning the power on and offTurning on the power Power button Main Power switchScreen characteristics reference Screen requirementsStandard setting-up positions Standard setting-up dimensionsProjection distance L Maximum Minimum Adjusting the position of the projected picture Adjustment procedure Setting the projector up horizontallyRetracting the adjustable legs Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentFront mounting Setting-up positions and changing the projection methodSetting procedure Rear mountingBasic operation Changing the input signalProjector Remote control unit Press the Video buttonSignal data RGB signals that can be inputDisplay mode name VGA400 VGA460 Svga XGA Mxga Sxga MAC16 MAC21 HdtvNTSC4.43 Operating procedureAuto Ntcs PAL PAL-M PAL-N SecamAdjusting the volume Freezing the pictureSelecting the picture mode Adjusting the picture to the desired setting Adjustment Range BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentCorrection procedure Correcting the picture position automaticallyWhen adjusting the vertical position V-POSI Adjusting the picture positionWhen adjusting the horizontal position H-POSI Adjustment procedure for horizontal position adjustmentAdjusting the video size For overscanningFor underscanning About dot clock adjustment Using other useful functions Using the video impose functionEnlarging part of the input picture Disabling the Power button of the remote control unit Setting procedure To change the language to German Changing the on-screen display languageUsing the power save function Using the lens retracting functionSetting procedure Audio system Laser disc player System configuration exampleExample of connection to audio-visual equipment VCRExample of connection to a computer SUB HDSUB Example of connection Wireless mouseAbout the Macintosh adapter OperationCommunication Settings Using the serial connectorPin layout and signal names for Serial connector Basic formatControl commands Cable specificationsIndicator display Problem IndicatorsLamp indicator Temp indicator Indicator name Possible causeCleaning the air filter Clean the air filter and the air filter clamps Lamp unit replacement period Replacing the lamp unitReplacement procedure Lamp unit cover Fixing screw for the lamp unit coverPage Before asking for service, check the following points Specifications RGB HD/SYNC RGB OUT Audio Video Audio in L-RTrademark Acknowledgements FCCDimensions