Panasonic PT-L795U manual Adjusting the picture to the desired setting

Adjusting the picture to the desired setting

You can adjust the picture settings for any of the input signal sources selected according to the procedure on page 20. The items which can be adjusted vary depending on the type of input signal. The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN terminal or the VIDEO IN terminal.

Adjustment procedure <for the COLOR setting>

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “PICTURE”.

3.Press the ENTER button to display the PICTURE screen.

4.Press the “ ” and “ ” buttons to select “COLOR”.

5.Press the ENTER, “ ” or “ ” button to display the COLOR individual adjustment screen.

6.Continue pressing the “ ” and “ ” buttons to adjust the color. The current setting will be displayed on the screen by numerals and a bar.

The adjustment operation and the changes made will vary depending on which adjustment item is selected. Refer to the table below for details.

Adjustment Item Button

Adjustment function display
Numeric adjustment level display		Bar display
Adjustment Details	Adjustment Range	Remarks

COLOR	Press the “ ” button.
	Press the “	” button.
TINT	Press the “ ” button.
	Press the “ ” button.
BRIGHT	Press the “ ” button.
	Press the “	” button.
CONTRAST	Press the “ ” button.
	Press the “ ” button.
	Press the “	” button.

The color becomes darker. The color becomes lighter. Flesh tones become greenish. Flesh tones become reddish. The screen becomes brighter. The screen becomes darker.

The screen becomes brighter and the picture becomes darker.

The screen becomes darker and the picture becomes lighter.

The picture quality becomes sharper.

Max. value 63 S-VIDEO/VIDEO only Min. value 0

Max. value 63 NTSC, NTSC 4.43 (S-

Min. value 0 VIDEO/VIDEO)only Max. value 63

Min. value 0

Max. value 63

Min. value 0

Max. value 3

SHARPNESS	” button.
Press the “

The picture quality becomes softer.

Min. value 0

S-VIDEO/VIDEO only

NOTE:

lf no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed, the display will return to the PICTURE screen.

If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed.

Refer to page 22 for details on the TV-SYSTEM settings which appear in the PICTURE screen, and to page 24 for the PICTURE MODE settings.

Refer to the next page for details on adjustment of the WHITE BALANCE R/G/B (W-BAL-R/G/B) settings which appear when RGB signals are being input and the PICTURE screen is being displayed.

25