Fujitsu LT800P warranty If the connection is successful

Problem

Possible Cause

Possible Solution

IP packet isn’t

Example: if the destination IP address is

reaching its

10.0.1.3:

destination

C:\>ping 10.0.1.3

(continued)

A message similar to the following appears

if the connection is successful.

Pinging 10.0.1.3 with 32 bytes of data:

Reply from 10.0.1.3: bytes=32 time=1ms

TTL=32

Reply from 10.0.1.3: bytes=32 time<10ms

TTL=32

Reply from 10.0.1.3: bytes=32 time=4ms

TTL=32

Reply from 10.0.1.3: bytes=32 time<10ms

TTL=32

If the connection fails, [Request timed

out], [Destination host unreachable], or a

similar message appears. In this case, refer

to the “Other computers are not

displayed” portion of this chapter.

Cannot connect to

There are several

The following causes are possible. Check

the network

possible causes, as

each one of them.

listed to the right.

■

The network name or encryption key

Refer to the

is not right.

specific section of

■

The driver has not correctly started.

this manual or your

■

The destination computer is not

user’s manual.

turned on.

■

You do not have the access privilege

to the destination computer.

■

The card has failed.

■

Hardware conflict.