Zebra Technologies zebra p330 user manual Installation and Setup

Page 25

Installation and Setup

Loading a Ribbon

Caution • Do not touch the print head if the printer has been in service within the last 10 minutes. It could be very hot and cause a burn.

Electrostatic Discharge Caution • A static discharge is possible if you touch any exposed metal parts. Use of an anti-static wrist strap or comparable anti-static protection is required.

4.Gently press the print head carriage down until it is fully lowered, as shown below. Very little force is neccessary to perform this step.

Note • During normal operation (with power connected and turned on), the ribbon would automatically synchronize when the Print Head is restored to its fully-down position. The ribbon would be identified and the corresponding parameters sent to the driver.

Since power is not connected at this point in the Installation and Setup Procedure, nothing will happen when the Print Head Carriage is closed. The ribbon will synchronize when power is turned on.

980459-001 Rev. A

P330i User’s Manual

13

Image 25
Contents User’s Manual Page Foreword Return Materials AuthorizationCopyright Notice Warranty InformationTrademarks PrintersSpare Parts Product Disposal Declarations of ConformitySupplemental Information Smart Card Options P330i Printer ModelIcons Table of Contents Troubleshooting Appendix C Connecting to a Network Xii P330i User’s Manual Introduction Printer FeaturesControls, Connectors, and Indicators Print Head Open LCD PanelIntroduction General Information Installation and SetupUnpacking the Printer Installation and SetupUnpacking the Printer CD-ROM with Driver Wizard Print Head Carriage Latch Installing the P330i Print Driver Loading a Ribbon Take-up Spool Flange Supply Spool Installation and Setup Installing the Card Cleaning Cartridge Close the printer’s Main Cover Setting the Card Thickness Control Card Thickness Control Loading Cards Installation and Setup Card Output Hopper Connecting the Printer to your Computer Connecting Power Packing the P330i Printer for Shipment Printing a Test CardPacking the P330i Printer for Shipment Printing a Card Setting Printer PropertiesPrinting a Sample Card Feeding One Card at a Time Printing a Card Cleaning the Printer CleaningWhen to Clean How to Clean Cleaning the Print Head When to Replace the Cleaning Roller Card Cleaning CartridgeHow To Replace the Cleaning Roller Cleaning Replace the Card Cleaning Cartridge into the printer Troubleshooting Head Open message Print Quality Issues Troubleshooting Troubleshooting Troubleshooting Resetting to Factory Defaults Troubleshooting the Ethernet Connection and AdapterEthernet Adapter Status Indicator Network Status/Activity Indicator General Specifications Technical SpecificationsRibbon Specifications Card SpecificationsBar Codes Card DimensionsFonts Bi-Directional Communications Interfaces Mechanical SpecificationsElectrical EnvironmentalOptions Introduction Magnetic Card Stripe EncoderMedia Loading Orientation Sample Encoding Program Magnetic Encoder CleaningISO Standard Encoding Magnetic Card Stripe Encoder Smart Card Contact Station DB-9 Pin Smart Card Contact Points Smart Card Contact Station InterfacePrinter Sharing Connecting to a NetworkInternal Print Server External Print Server