Installation and Setup
Connecting Power
Connecting Power
The P330i Printer includes an internal AC power supply that accepts nominal input voltage in the range from 110 to 230 volts at 50 to 60 Hertz. The power source must be grounded.
Depending on specific model number, your P330i Printer will include one or two power cords; use the one that is appropriate for the AC power source connection at your location. If neither has an appropriate connector, AC power cords may be purchased locally; make sure it is a
Power
Switch
Power
Connector
1.Place the Printer’s power switch in the OFF ( O ) position.
2.Depending on your local AC voltage, plug the appropriate power cord into the printer’s power connector and a grounded AC power source connection.
Caution • If the power cord appears damaged in any way, or if the power cord will not securely plug into the Printer’s power connector or the AC power source connection, STOP! Use of a damaged or incorrect power cord could cause equipment damage, result in an electrical fire, or possibly cause injury.
3.To turn the Printer on, set the Printer’s power switch to the ON ( ) position.
22 | P330i User’s Manual |