Zebra Technologies zebra p330 user manual Feeding One Card at a Time

Printing a Card

Feeding One Card at a Time

8.Once you are ready to print, go to the File menu and select Print.

9.If the printer was not selected as the default printer, go to the File menu, select Print Setup and choose Zebra P330i Card Printer from the printer names list. Then Close the Print Setup dialog box.

10.The printer will feed in a card and start printing (the data download time will vary depending on the complexity of the card design and the processing speed of your computer).

11.Once the printing job is complete, the card is ejected from the printer.

Feeding One Card at a Time

A Manual Feed Slot is available below the Card Input Hopper for feeding single cards. The Card Input Hopper must be empty for single-card feeding to work properly.

1.Open the Card Feeder cover. Verify that there are no cards in the feeder, then close the Card Feeder cover.

2.Insert a single card into the slot below the Card Feeder. Do not feed more than one card at a time.

Note • If single-card feeding will be the normal mode of operation, you may select that mode through the driver software. In single-card feed mode, the card will not be printed until the print job has been sent to the printer and the card to be printed has been inserted into the single-card feed slot

980459-001 Rev. A P330i User’s Manual 27