Nortel Networks NN46200-301 manual Text conventions, Returning to the CLI

10Preface

Password: nortel

ERS-8310:5#configure terminal

ERS-8310:5(config)#

Returning to the CLI

The config.cfg file for the CLI and the config.cfg file for the NNCLI are not compatible. If you decide to change the CLI mode to NNCLI, or the reverse, you must use the config.cfg file for the selected mode.

To switch from the NNCLI to the CLI, enter the following commands:

ERS-8310:5(config)# no boot flags nncli

ERS-8310:5(config)# exit

ERS-8310:5(config)# save boot

You must reboot the switch for this change to take effect.

Text conventions

This guide uses the following text conventions:

angle brackets (< >)	Indicate that you choose the text to enter based on
	the description inside the brackets. Do not type the
	brackets when entering the command.
	Example: If the command syntax is
	ping <ip_address>, you enter
	ping 192.32.10.12
bold body text	Indicates objects such as window names, dialog box
	names, and icons, as well as user interface objects
	such as buttons, tabs, and menu items.
bold Courier text	Indicates command names, options, and text that
	you must enter.
	Example: Use the dinfo command.
	Example: Enter show ip {alertsroutes}.
braces ({})	Indicate required elements in syntax descriptions
	where there is more than one option. You must
	choose only one of the options. Do not type the
	braces when entering the command.
	Example: If the command syntax is
	show ip {alertsroutes}, you must enter
	either
	show ip alerts or show ip routes, but not
	both.

Nortel Ethernet Routing Switch 8300

Installation — AC Power Supply

NN46200-301 03.01 Standard

4.027 August 2007

Copyright © 2007, Nortel Networks