Nortel Networks NN46200-301 manual Appendix Electrical specifications for the AC power supply

24 Appendix Electrical specifications for the AC power supply

Note the following information:

•The maximum steady-state output power is limited to a total of 1140 W for any combination of output voltages/currents at low-line 100-120 VAC nominal input voltage conditions.

•The maximum steady-state output power is limited to a total of 690 W for any combination of output voltages/currents, excluding the 50 VDC source at low-line 100-120VAC nominal input voltage conditions. This limitation is required to ensure that there is sufficient PoE power or 450 W total at this input voltage condition.

•The maximum steady-state output power is limited to a total of 870W for any combination of output voltages/currents, excluding the 50 VDC source at high-line 200-240VAC nominal input voltage conditions. This limitation is required to ensure maximum PoE power or 900 W total for the 50 VDC source at this input voltage condition.

•To obtain the full output power rating of 1770 W, you must connect the power supply to a nominal (200-240VAC) input voltage source.

The following table list the power specifications for the Ethernet Routing Switch 8302AC power supply.

Table 6

Ethernet Routing Switch 8302AC power specifications

AC Input Power Ratings

Input voltage range (nominal):	100-120 VAC	200-240 VAC
Input current (nominal):	12 A	9 A
Frequency range (nominal):	50-60 Hz	50-60 Hz
Input VA	1192 VA	1768	VA
Input power consumption:	1180 W	1750	W
Heat dissipation	1126BTU/hr	1195	BTU/hr
(thermal/output):
Hold-up time:	20 ms	20 ms
	DC Output Power Ratings
Max. output power (combined):	850W (760W + 90W fans)	1400 W (1310W + 90W fans)
Non-PoE:	3.3 VDC @ 150 A	3.3 VDC @ 150 A
	12 VDC @ 65 A	12 VDC @ 65 A
PoE:	50 VDC @ 18 A	50 VDC @ 18 A
Fans:	12 VDC @ 7.5 A	12 VDC @ 7.5 A

Nortel Ethernet Routing Switch 8300

Installation — AC Power Supply

NN46200-301 03.01 Standard

4.027 August 2007

Copyright © 2007, Nortel Networks