Belkin P74278, F8E826-OPT manual Connecting the PS/2 Mouse

Page 8

HARDWARE INSTALLATION

Connecting the PS/2 Mouse

PS/2 in Windows 98, Me, 2000, and XP

1.Turn off your computer.

2.Connect the USB-to-PS/2 connector to the mouse cable on the receiver.

3.Insert the cable with the connector to the PS/2 (6-pin) mouse port on your computer.

4.Place the batteries into the mouse.

5.Turn the computer on.

6.When the computer finishes starting up, it will automatically detect the mouse and make it functional.

NOTE: If the mouse does not work, please see instructions under “Synchronizing your Mouse to your Receiver”.

7.When your mouse is properly connected, you can start the software installation.

5

Image 8

Contents P74278 ErgoFit Wireless Optical Mouse Table of Contents Introduction Overview Hardware Installation Connecting the USB Mouse Connecting the PS/2 Mouse Setting your Mouse to ID Mode Synchronizing your Mouse to your ReceiverSoftware Installation AutoScroll Using the WheelScrolling Zooming Software Features Button FunctionsRight Button Fourth ButtonFifth Button MagnifierMinimize RecallClose StartBattery and Channel ID SonarSlow Motion FocusSoftware Features Why don’t the scroll functions work with my notebook? TroubleshootingWhy isn’t my pointer moving smoothly? Troubleshooting Information FCC StatementFederal Communications Commission Notice ModificationsBelkin Corporation Limited Lifetime Product Warranty Canada-Industry Canada IC