PN9108U User Manual
The Power Status Screen
The Top Panel
Power Buttons:
The top panel of the Power Status screen is divided into eight subareas which correspond to the A- H outlets on the PN9108U’s rear panel.
Each subarea is composed of a socket icon that functions as the Power Button for its corresponding outlet, and an information panel to its right. Clicking the socket icon turns the power status of the computer attached to its outlet On or Off. The icon and the label under it inform you of the power status as shown in the following table:
Indication | Status |
Steady Gray | Power to the outlet is OFF. |
|
|
Flashing Gray | Power to the outlet is OFF but Modem Ring Resume has been |
| specified as the remote power option (see Modem Ring |
| Resume, p. 28, for details). |
|
|
Flashing Yellow | A change in the outlet’s power status is pending. See Modem |
| Ring Resume and System After AC Back, p. 28 for details. |
|
|
Steady Amber | Power to the outlet is ON. |
|
|
Flashing Lightbulb | Indicates that the outlet is either experiencing an overcurrent |
| situation, or the relay has failed. Click the icon to recover. If the |
| port recovers successfully, it returns to the status it was at before |
| it failed, and the icon changes to reflect the recovered status. If |
| the port cannot recover, contact Altusen technical support. |
|
|
18