PN9108U User Manual
2. Select the device whose address you wish to determine in the Device List.
MIf the list is empty, or your device doesn’t appear, click Enumerate to refresh the Device List.
MIf there is more than one device in the list, use the MAC address to pick the one you want. The PN9108U’s MAC address is located on its bottom panel.
3.Select either Obtain an IP address automatically (DHCP), or Specify an IP address. If you chose the latter, fill the IP Address, Subnet Mask, and Gateway fields with the information appropriate to your network.
4.Click Set IP.
5.After the IP address shows up in the Device List, click Exit to end the program.
Method 2:
1. Set your computer’s IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60) is the default address of the PN9108U.)
2.Specify the switch’s default IP address (192.168.0.60) in your browser, and you will be able to connect.
3.Assign a fixed IP address for the PN9108U that is suitable for the network segment that it resides on.
4.After you log out, be sure to reset your computer’s IP address to its original value.
46