American Power Conversion 100 VAC user manual Operation, Front Panel, Self-Test

Page 13

CHAPTER 4: OPERATION

Front Panel

This rack mount UPS has the power control and operating indicators located on the front panel.

TEST

0

T E S T

0

Operation

The ON and OFF buttons control the power to the outlets on the UPS. They can be used as a master On/Off switch for the connected equipment. The charger and communication circuits of the UPS remain operational as long as it is plugged into an acceptable utility power outlet.

Power On

Press and release the large, upper button labeled “l TEST” to supply power to the connected equipment. The equipment is immediately powered while the UPS performs a self-test.

Power Off

Press and release the small, lower button labeled “0” to turn off power to the connected equipment.

Whenever the UPS is plugged in and utility voltage is present, the charger maintains battery charge.

85%

67%

50%

33% 17%

Load Bar Graph

The 5-LED display on the left of the front panel shows the percentage of available power being used by the connected equipment (load). The display shows the voltage level between the highest LED lit and the next higher value. For example, if three LEDs are lit, the connected equipment is drawing between 50% and 67% of the UPS’s capacity. If all five LEDs are lit, the connected equipment is drawing between 85% and 100% of capacity. Thoroughly test your complete system to make sure that the UPS will not become overloaded. In the graphic to the left, the load capacity threshold is listed next to the LED (these are not shown on the actual UPS).

Self-Test

During the self-test, the UPS briefly operates the connected equipment on-battery. If the UPS passes the self-test, it returns to on-line operation. If the UPS fails the self-test it immediately

9

990-7096 Rev. 2

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Manual 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 VacPage Table of Contents English Maintenance and Troubleshooting Handling Safety Safety InformationElectrical Safety Conventions Used in this ManualBattery Safety Deenergizing SafetyRecycling of Batteries Basics How to Contact APCAbout APC About Your New UPSHow to Install Your Smart-UPS InstallationUnpacking Load the UPS into the Rack Mount the UPS in the RackFour-Post Racks Two-Post Racks Connect the Battery and Attach the Front Panel BezelRemoving the UPS from the Rack Turn on the UPS Connect Power and Equipment to the UPS990-7096 Rev Front Panel OperationOperation Self-TestUtility Power Battery Power Computer Interface Port Rear PanelTvss Screw Voltage SensitivityLow Battery Warning Level On-Battery OperationFunction Factory User Selectable Description Default Choices User Configuration ItemsReplacing the Battery Maintenance and TroubleshootingStorage Storage Conditions990-7096 Rev Troubleshooting Condition Display Beeper Some or all front panel indicators are flashingService and Transport Regulatory Agency Approvals On-Battery Run TimeLoad Run Time Watts Minutes Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents