CHAPTER 3: INSTALLATION
Unpacking
APC has taken care to design robust packaging for your product. However, accidents and damage may occur during shipment.
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.
Contents
The shipping package contains the UPS, its front panel bezel (disconnected from the unit), mounting rails, and a literature kit (containing mounting hardware and product documentation).
Placement
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Do not operate the UPS where the temperature and humidity are outside the specified limits.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the warranty.
How to Install Your Smart-UPS
To install the UPS follow these steps:
1.Mount the UPS in the rack.
2.Connect the battery and attach the front panel bezel.
3.Connect power and the equipment to the UPS.
4.Turn on the UPS.
5.Install optional PowerChute® software (sold separately).
This section describes each step in detail.
4 |