American Power Conversion 100 VAC user manual Troubleshooting

Page 21

Troubleshooting

Use the chart below to solve minor UPS installation problems. Contact APC Technical Support Staff (see How to Contact APC, page 3) for assistance with complex UPS problems.

Problem and Possible Cause

Solution

UPS will not turn on.

 

• ON button not pushed.

Press the ON button once to power the UPS and the connected

 

equipment.

• UPS not connected to AC power

Check that the power cable from the UPS to the utility power

supply.

supply is securely connected.

• UPS’s input circuit breaker tripped.

Reduce the load on the UPS by unplugging equipment and reset

 

the circuit breaker (on back of UPS) by pressing the plunger

 

back in.

• Very low or no utility voltage.

Check the AC power supply to the UPS with a table lamp. If

 

very dim, have the utility voltage checked.

• Battery not connected properly.

Check that the battery connector is fully engaged.

UPS will not turn off.

 

• Internal UPS fault.

Do not attempt to use the UPS. Unplug the UPS and have it

 

serviced immediately.

UPS operates on-battery although normal line voltage exists.

• UPS’s input circuit breaker tripped.

Reduce the load on the UPS by unplugging equipment and reset

 

the circuit breaker (on back of UPS) by pressing the plunger

 

back in.

• Very high, low, or distorted line

Move the UPS to a different outlet on a different circuit. Test

voltage. Inexpensive fuel powered

the input voltage with the utility voltage display. If acceptable

generators can distort the voltage.

to the connected equipment, reduce the UPS’s sensitivity. See

 

Voltage Sensitivity, page 12, for procedures.

UPS beeps occasionally.

 

• Normal UPS operation.

None. The UPS is protecting the connected equipment.

UPS does not provide expected backup time.

• The UPS’s battery is weak due to a

Charge the battery. Batteries require recharging after extended

recent outage or is near the end of

outages. Also, they wear faster when put into service often or

its service life.

when operated at elevated temperatures. If the battery is near

 

the end of its service life, consider replacing the battery even if

 

the replace battery indicator is not yet lit.

• The UPS is overloaded.

Check the UPS’s load bar display. Unplug less needed

 

equipment, such as printers.

Front panel indicators (the six in the center) light sequentially.

• The UPS has been shut down by

None. The UPS will restart automatically when utility power

remote control.

returns. The indicators illuminate from top to bottom then

 

bottom to top.

• The UPS has been put into sleep

None. The UPS will restart automatically when the sleep timer

mode by remote control.

expires. The indicators illuminate from top to bottom then back

 

to the top.

17

990-7096 Rev. 2

Page 20 Page 22
Image 21
Page 20 Page 22
Contents User’s Manual 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 VacPage Table of Contents English Maintenance and Troubleshooting Handling Safety Safety InformationElectrical Safety Conventions Used in this ManualDeenergizing Safety Battery SafetyRecycling of Batteries Basics How to Contact APCAbout APC About Your New UPSInstallation How to Install Your Smart-UPSUnpacking Mount the UPS in the Rack Load the UPS into the RackFour-Post Racks Connect the Battery and Attach the Front Panel Bezel Two-Post RacksRemoving the UPS from the Rack Turn on the UPS Connect Power and Equipment to the UPS990-7096 Rev Front Panel OperationOperation Self-TestUtility Power Battery Power Computer Interface Port Rear PanelTvss Screw Voltage SensitivityLow Battery Warning Level On-Battery OperationFunction Factory User Selectable Description Default Choices User Configuration ItemsReplacing the Battery Maintenance and TroubleshootingStorage Storage Conditions990-7096 Rev Troubleshooting Condition Display Beeper Some or all front panel indicators are flashingService and Transport On-Battery Run Time Regulatory Agency ApprovalsLoad Run Time Watts Minutes Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents