American Power Conversion 100 VAC Maintenance and Troubleshooting, Storage, Replacing the Battery

Page 19

CHAPTER 5: MAINTENANCE AND TROUBLESHOOTING

Storage

This section describes how to store the UPS while it is not in use. To remove the UPS from the rack, see Removing the UPS from the Rack, page 6.

Storage Conditions

Store the UPS covered and flat (rack mount orientation) in a cool, dry location, with its battery fully charged. Disconnect any cables connected to the computer interface port to avoid unnecessarily draining the battery

Extended Storage

At -15 to +30 °C (+5 to +86 °F), charge the UPS’s battery every six months.

At +30 to +45 °C (+86 to +113 °F), charge the UPS’s battery every three months.

Replacing the Battery

Please read Chapter 1: Safety Information, page 1, before replacing the battery tray. Once the battery is disconnected, the connected equipment is not protected from power outages.

This UPS has an easy to replace hot-swappable battery tray. Battery replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and the protected equipment on for the following procedure. See your dealer or APC (refer to How to Contact APC, page 3) for information on replacement battery cartridges.

Smart-UPS Model

Replacement Battery Cartridge

SU1400RMJ2U

RBC24-J

 

 

1.The battery tray is accessible from the front of the UPS.

2.Be careful removing the battery tray – it is heavy.

3.This procedure requires a Phillips head screwdriver.

4.Small sparks at the battery connectors are normal during re-connection.

15

990-7096 Rev. 2

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User’s Manual 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 VacPage Table of Contents English Maintenance and Troubleshooting Conventions Used in this Manual Safety InformationHandling Safety Electrical SafetyBattery Safety Deenergizing SafetyRecycling of Batteries About Your New UPS How to Contact APCBasics About APCHow to Install Your Smart-UPS InstallationUnpacking Load the UPS into the Rack Mount the UPS in the RackFour-Post Racks Two-Post Racks Connect the Battery and Attach the Front Panel BezelRemoving the UPS from the Rack Turn on the UPS Connect Power and Equipment to the UPS990-7096 Rev Self-Test OperationFront Panel OperationUtility Power Battery Power Voltage Sensitivity Rear PanelComputer Interface Port Tvss ScrewLow Battery Warning Level On-Battery OperationFunction Factory User Selectable Description Default Choices User Configuration ItemsStorage Conditions Maintenance and TroubleshootingReplacing the Battery Storage990-7096 Rev Troubleshooting Condition Display Beeper Some or all front panel indicators are flashingService and Transport Regulatory Agency Approvals On-Battery Run TimeLoad Run Time Watts Minutes Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents