American Power Conversion 100 VAC user manual 990-7096 Rev

Page 20

1.Face the front of the UPS and, using both hands, insert each index finger behind the lip of the curved section of the front panel bezel and pull towards you. The front panel bezel will unsnap.

2.Set the bezel aside.

•

 

•

 

Ž

Œ

 

 

•

 

•

3.Take out the white cord, which is tucked into the space above the battery connector Œ. Grasp the cord and pull firmly towards you to disconnect the battery.

4.Use a Phillips head screwdriver to remove the four (4) screws • that secure the battery tray. Set the screws aside.

5.Use the battery tray handle Ž to slide the tray out halfway. Then hold the tray from the sides and slide it out to the maximum extended position. A stop tab • on the bottom of the tray will prevent the tray from coming out completely.

6.Carefully lift the tray up so that the stop tab • clears the ledge on the unit.

7.Return the battery tray to APC using the package in which your replacement tray shipped. (See How to Contact APC, page 3, for details.) The battery replacement kit includes a new battery tray.

8.Hold the new tray on the sides and align it with the opening.

9.Raise the back of the tray up slightly to position the stop tab on the inside of the opening. Then level the tray and push it in completely.

10.Remove the tape on the new battery tray connector to expose the cable connector.

11.Locate the UPS battery connector Œ which is to the right of the battery tray and recessed. Connect the battery cable connector to the UPS connector. Press firmly to ensure that the connection is tight. You will hear a “snap” when the connector is properly seated.

12.Replace the four (4) screws removed in step 4.

13.Tuck the white battery cable cord neatly into the space above the UPS connector.

14.Hold the front panel bezel with the cutout section on the right. Align the tabs on the side of the bezel with the slots on the front of the UPS Ž and firmly snap it into place.

990-7096 Rev. 2

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 Vac User’s ManualPage Table of Contents English Maintenance and Troubleshooting Safety Information Handling SafetyElectrical Safety Conventions Used in this ManualRecycling of Batteries Deenergizing SafetyBattery Safety How to Contact APC BasicsAbout APC About Your New UPSUnpacking InstallationHow to Install Your Smart-UPS Four-Post Racks Mount the UPS in the RackLoad the UPS into the Rack Removing the UPS from the Rack Connect the Battery and Attach the Front Panel BezelTwo-Post Racks Connect Power and Equipment to the UPS Turn on the UPS990-7096 Rev Operation Front PanelOperation Self-TestUtility Power Battery Power Rear Panel Computer Interface PortTvss Screw Voltage SensitivityOn-Battery Operation Low Battery Warning LevelUser Configuration Items Function Factory User Selectable Description Default ChoicesMaintenance and Troubleshooting Replacing the BatteryStorage Storage Conditions990-7096 Rev Troubleshooting Some or all front panel indicators are flashing Condition Display BeeperService and Transport Load Run Time Watts Minutes On-Battery Run TimeRegulatory Agency Approvals Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents