American Power Conversion 100 VAC Connect Power and Equipment to the UPS, Turn on the UPS

Page 11

on the front of the unit. You may see small sparks when connecting the battery.

3.Tuck the white battery cable cord into the space above the UPS connector.

4.Unpack the front panel bezel and hold it with the cutout section

on the right. Align the tabs on the side of the bezel with the slots on the front of the UPS Ž and firmly snap it into place.

Connect Power and Equipment to the UPS

Use an APC supplied cable to connect to the Computer Interface Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

•Plug the UPS into a standard receptacle.

•Plug the equipment into the back of the UPS.

•Do not plug laser printers into a UPS of 1000 VA or less, due to the large increase in power consumption when printing.

•Turn on all connected equipment (the equipment will not be powered until the UPS is turned on).

•Add any optional accessories. See the literature accompanying the accessory for details.

•Connect ground leads to the TVSS screw (optional). The transient voltage surge suppression (TVSS) screw provides grounding through the UPS’s power cord ground conductor. See Rear Panel, page 13, for the location of the screw. To make the connection, loosen the screw and connect the surge suppression device’s ground lead. Tighten the screw to secure the lead.

Turn on the UPS

Make sure the battery is connected before turning on the UPS!

•Press the UPS’s on button, located on the front panel, to power-up your UPS. This will power-up connected equipment.

7

990-7096 Rev. 2

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Manual 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 VacPage Table of Contents English Maintenance and Troubleshooting Conventions Used in this Manual Safety InformationHandling Safety Electrical SafetyRecycling of Batteries Deenergizing SafetyBattery Safety About Your New UPS How to Contact APCBasics About APCUnpacking InstallationHow to Install Your Smart-UPS Four-Post Racks Mount the UPS in the RackLoad the UPS into the Rack Removing the UPS from the Rack Connect the Battery and Attach the Front Panel BezelTwo-Post Racks Turn on the UPS Connect Power and Equipment to the UPS990-7096 Rev Self-Test OperationFront Panel OperationUtility Power Battery Power Voltage Sensitivity Rear PanelComputer Interface Port Tvss ScrewLow Battery Warning Level On-Battery OperationFunction Factory User Selectable Description Default Choices User Configuration ItemsStorage Conditions Maintenance and TroubleshootingReplacing the Battery Storage990-7096 Rev Troubleshooting Condition Display Beeper Some or all front panel indicators are flashingService and Transport Load Run Time Watts Minutes On-Battery Run TimeRegulatory Agency Approvals Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents