American Power Conversion 100 VAC user manual Service and Transport

Page 23

Service and Transport

If the UPS requires service do not return it to the dealer! Follow these steps:

1.Review the problems discussed in Troubleshooting, page 17, to eliminate common problems.

2.Verify that no circuit breakers are tripped – this is the most common UPS problem!

3.If the problem persists, call customer service, refer to How to Contact APC, page 3, or visit the APC Internet website (www.apcc.com).

•Note the model number of the UPS, the serial number, and the date purchased. A technician will ask you to describe the problem and try to solve it over the phone, if possible. If this is not possible the technician will issue a Returned Material Authorization Number (RMA#).

•If the UPS is under warranty, repairs are free. If not, there is a repair charge.

4.Pack the UPS in its original packaging. If the original packing is not available, ask customer service about obtaining a new set.

Pack the UPS properly to avoid damage in transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under warranty

5.Mark the RMA# on the outside of the package.

6.Return the UPS by insured, prepaid carrier to the address given to you by Customer Service.

Always DISCONNECT THE BATTERIES before shipping the UPS to avoid damage during transport. (U.S. Federal Regulation requires that batteries be disconnected during shipment.) The batteries may remain in the UPS; they do not have to be removed.

This requirement applies whether the UPS is moved indoors or out, alone or installed in an equipment rack or system.

19

990-7096 Rev. 2

Page 22 Page 24
Image 23
Page 22 Page 24
Contents User’s Manual 1400 VA 2U Rack Mount Uninterruptible Power Supply 100 VacPage Table of Contents English Maintenance and Troubleshooting Conventions Used in this Manual Safety InformationHandling Safety Electrical SafetyRecycling of Batteries Deenergizing SafetyBattery Safety About Your New UPS How to Contact APCBasics About APCUnpacking InstallationHow to Install Your Smart-UPS Four-Post Racks Mount the UPS in the RackLoad the UPS into the Rack Removing the UPS from the Rack Connect the Battery and Attach the Front Panel BezelTwo-Post Racks Turn on the UPS Connect Power and Equipment to the UPS990-7096 Rev Self-Test OperationFront Panel OperationUtility Power Battery Power Voltage Sensitivity Rear PanelComputer Interface Port Tvss ScrewLow Battery Warning Level On-Battery OperationFunction Factory User Selectable Description Default Choices User Configuration ItemsStorage Conditions Maintenance and TroubleshootingReplacing the Battery Storage990-7096 Rev Troubleshooting Condition Display Beeper Some or all front panel indicators are flashingService and Transport Load Run Time Watts Minutes On-Battery Run TimeRegulatory Agency Approvals Limited Warranty

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents