American Power Conversion 220 VAC, 8000 VA, 240 VAC, 10000 VA user manual User Configurable Items

USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, SMART SLOT ACCESSORY CARDS, OR TERMINAL MODE.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
Automatic Self-Test	Every 14 days	Every 7 days(168 hours),	Set the interval at which the
	(336 hours)	14 days (336 hours)	UPS will execute a self-test.
		On Startup Only,
		No Self-Test
UPS ID	UPS_IDEN	Up to eight characters to	Uniquely identify the UPS, (i.e.
		define the UPS	server name or location) for
			network management purposes.
Date of Last Battery	Manufacture Date	Date of	Reset this date when you replace
Replacement		Battery Replacement	the battery module.
		mm/dd/yy
Minimum Capacity	0 percent	0, 15, 25, 35, 50, 60, 75,	Following a low-battery
Before Return from		90 percent	shutdown, the batteries will be
Shutdown			charged to the specified
			percentage before powering
			connected equipment.
Alarm Delay After	5 second delay	5 or 30 second delay	Mute ongoing alarms or disable
Line Failure		At Low Battery	all alarms permanently.
		Never
Shutdown Delay	20 seconds	0, 20, 60, 120, 240, 480,	Set the interval between the time
		720, 960 seconds	when the UPS receives a
			shutdown command and the
			actual shutdown.
Duration of	2 minutes	2, 5, 7, 10, 12, 15, 18,	The low battery warning beeps
Low Battery Warning.	PowerChute	20 minutes	are continuous when two
			minutes of run time remain.
	software provides
	automatic,		Change the warning interval
	unattended		default to a higher setting if the
	shutdown when		operating system requires a
	approximately 2		longer interval for shutdown.
	minutes of battery
	operated runtime
	remains.
Synchronized Turn-on	0 seconds	0, 20, 60, 120, 240, 480,	The UPS will wait the specified
Delay		720, 960 seconds	time after the return of utility
			power before turn-on (to avoid
			branch circuit overload).

11