American Power Conversion 10000 VA, 8000 VA, 220 VAC, 240 VAC user manual Introduction

Introduction

The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged.

INSTALLATION

Read the Safety Instruction sheet before installing the UPS.

Unpacking

Inspect the UPS upon receipt. Notify the carrier		ƒ Literature kit containing:
and dealer if there is damage.		ƒ	Software CD
The packaging is recyclable; save it for reuse or		ƒ Smart-UPS User Manuals CD
dispose of it properly.
		ƒ	Serial cable
Check the package contents.
		ƒ Six output power cords
ƒ	UPS
		ƒ Two battery cable assemblies
ƒ	Front bezel
		ƒ	Two ground wires
		ƒ	Product documentation, warranty
			information, and safety information
		ƒ	Network Management Card
			documentation

Specifications

TEMPERATURE	32° to 104° F (0° to 40° C)	This unit is intended for
OPERATING		indoor use only. Select a
STORAGE	5° to 113° F (-15 to 45 ° C) charge UPS battery every six months	location sturdy enough to
		handle the weight.
MAXIMUM
		Do not operate the UPS where
ELEVATION
OPERATING	10,000 ft (3,000 m)	there is excessive dust or the
STORAGE	50,000 ft (15,000 m)	temperature and humidity are
		outside the specified limits.
HUMIDITY	0% to 95% relative humidity, non-condensing
		Ensure the air vents on the
		front and rear of the UPS
		are not blocked.
WEIGHT	244 lbs (111 kg)
UPS
UPS WITH	284 lbs (129 kg)
PACKAGING

1