American Power Conversion 220 VAC, 8000 VA, 240 VAC, 10000 VA user manual

1.Switch the UPS input circuit breaker (see A in diagram) and utility circuit breakers OFF.

2.Remove the input access panel, (see B in diagram).

3.Remove circular knockout.

4.Run appropriate size wire through the access panel, and connect to the terminal block, (Green: Ground, Brown: Hot, Blue: Neutral). Connect the ground wire first. Use appropriate strain reliefs, (not included).

5.For three-phase input, set the input phase selector switch, (see C in diagram) to “3”. For single-phase input, leave the switch in the default position of “1”.

6.Replace the access panel.

3