American Power Conversion SURTA2000XL, SURTA1500XLJ user manual

				Configuration Settings
Function	Factory Default	User Selectable		Description
		Choices
Low Battery	2 minutes	• 2 m	• 14 m	PowerChute software interface provides auto-
Warning		• 5 m	• 17 m	matic, unattended shutdown when approxi-
		• 8 m	• 20 m	mately two minutes of battery operated run
				time remains.
		• 11 m	• 23 m
				The low-battery warning beeps are continuous
				when two minutes of run time remain.
				Change the low battery warning interval set-
				ting to the time that the operating system or
				system software requires to safely shut down.
Synchronized	0 seconds	• 0 s	• 240 s	Specify the time the UPS will wait after the
Turn-on Delay		• 60 s	• 300 s	return of utility power before start up (to avoid
		• 120 s	• 360 s	branch circuit overload).
		• 180 s	• 420 s
High Bypass Points	100V Models:	100V	120V	Maximum voltage that the UPS will pass to
	110V	• 107V	• 127V	connected equipment during internal bypass
	120V Models:	• 110V	• 130V	operation.
	133V	• 113V	• 133V
		• 116V	• 136V
		• 119V	• 139V
		• 122V	• 142V
		• 125V	• 145V
		• 128V	• 148V
Low Bypass Points	100V Models:	100V	120V	Minimum voltage that the UPS will pass to
	78V	• 78V	• 86V	connected equipment during internal bypass
	120V Models:	• 80V	• 88V	operation.
	86V	• 82V	• 90V
		• 84V	• 92V
		• 86V	• 94V
		• 88V	• 96V
		• 90V	• 98V
		• 92V	• 100V
Output Frequency	Automatic	50 ± 3 Hz or		Sets the allowable UPS output frequency.
	50 ± 3 Hz or	50 ± 0.1 Hz		Whenever possible, the output frequency
	60 ± 3 Hz	60 ± 3 Hz or		tracks the input frequency.
		60 ± 0.1 Hz
Number of Battery	1	Number of connected bat-		Defines the number of connected battery packs
Packs		tery packs		for proper run time prediction.
				1 = internal battery module,
				2 = one SURTA48XLBP or SURTA48XLBPJ,
				3 = two SURTA48XLBP or SURTA48XLBPJ,
				etc.

Smart-UPS RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual 9