APC SY160K160H, PDUM160H-B, SYCFXR9 How to remove a power module, How to install a power module

Maintenance: Parts Replacement

How to remove a power module

Use two people to lift components weighing between 18–32 kg/40–70 lb.





1

1







Turn the locking latch down until the arrow points down.

Unscrew the spring-activated knobs on both sides of the module.

Pull the module out of the enclosure as far as the lock mechanism will allow.

Release the lock by pushing the black plastic tab on each side of the module.

Pull the module up and out of the enclosure.

How to install a power module

Reverse the procedure for installation of the replacement module. The display interface will indicate that the system has recognized a new module.

Caution: Secure the locking latch before tightening the spring-activated knobs on the module to ensure that the module makes proper contact in the unit. The power module will not operate unless the locking latch is locked.

990-3015-001 Symmetra PX 160 kW 400 V Operation 17