Agilent Technologies 6015A General Information, Introduction, Description, Safety Considerations

Page 9

1

General Information

Introduction

This manual contains specifications, installation instructions, and operating instructions for DC Power Supply Models: Agilent6010A, 6011A, 6012B, 6015A, 6023A and 6028A. Refer to "Related Documents" for other information concerning these products.

Description

These power supplies are autoranging supplies. Autoranging allows the power supply to deliver full output power over a higher voltage and current combination than would be possible with a rectangular output characteristic (see figure 1-1). They use a 20k Hz pulse-width modulation circuit with power MOSFETs to provide the autoranging output characteristic with laboratory performance.

Output voltage and current are continuously indicated on two 3 ½ digit displays. Front-panel controls allow the user to set output voltage, current and Overvoltage Protection (OVP) trip levels. OVP protects the load by quickly and automatically interrupting energy transfer if a preset voltage trip level is exceeded. Push button switches allow the display to alternately show the programmed values of voltage and current or the overvoltage limit. LED indicators show the operating state of the unit (CV, CC, Unregulated and Overvoltage).

All connections are made to rear-panel screw-on terminals.

Output voltage can be locally or remotely sensed.

A six-position MODE switch located on the rear panel is used to change from front panel control to remote voltage or remote resistance control. See section 3 for a description of remote programming, remote sensing and several methods of multiple supply operation.

Either the positive or negative output terminal may be grounded or the output may be floated (including output voltage) up to ± 240 Vdc on models 6011A, 6012B, 6023A and 6028A or ± 550 Vdc on models 6010A and 6015A from chassis ground.

The power supply is fan cooled and is packaged in an Agilent Technologies System II-compatible modular that provides easy access for servicing. A thermostat shuts down the supply if an over-temperature condition occurs and resets automatically.

Safety Considerations

This product is a Safety Class 1 instrument (provided with a protective earth terminal). The instrument and this manual should be reviewed for safety markings and instructions before operation. Refer to the Safety Summary page at the beginning of this manual for general safety information. Safety information for specific procedures is located at appropriate places in this manual.

Options

Options are standard factory modifications or accessories that are delivered with the supply. The following options are available. Note lower output power and voltage specifications for Option 100, which is described in Appendix A.

General Information 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents USER’S Guide Certification Safety Summary Safety Symbols Manufacturer’s Name and Address Safety InformationProduct Names Model NumbersManufacturer’s Declaration HerstellerbescheinigungTable Of Contents Index VAC Input Power OptionGeneral Information Safety ConsiderationsIntroduction DescriptionOption Description AccessoriesFor Agilent Models 6023A and 6028A Agilent Part No DescriptionSpecifications Instrument and Manual IdentificationOrdering Additional Manuals Related Documents Supplemental Characteristics Agilent Technologies Model Performance Specifications6010A 6011A6015A 6012B6023A 6028ATemperature Rating C Supplemental CharacteristicsShipping CertificationOutput Characteristic Curve General Information Output Impedance General Information Installation Initial InspectionPreparation for Use Outline Diagrams Input Power RequirementsRack Mounting Power Connection Agilent Models 6010A, 6011A, 6012B and 6015AAgilent Models 6023A and 6028A Line Voltage Option Conversion Agilent 6010A, 6011A, 6012B Line Voltage Conversion Components Installation AC Line Impedance Check Repackaging for ShipmentModel Voltage Rear Panel Screw Sizes and Part Numbers Description Agilent Part numberAgilent Model 6023A and 6033A Operating Instructions Front-Panel Controls and Indicators Operating InstructionsDisplay OVP Turn-On Checkout ProcedureOperating Instructions Connecting the Load Initial Setup and InterconnectionsMaximum Wire Lengths To Limit Voltage Drops Stranded Copper Wire AmpacityWire Size Protective Shutdown Connecting a Bypass Capacitor Overvoltage Protection OVPOperating Modes Normal ModeDetermining Operating Point Overrange Operation Constant Voltage Operation Constant Current Operation Remote Voltage SensingBoth Voltage change due to open sense leadConstant Voltage Output, Resistance Control Analog ProgrammingVoltage Programming of Output Voltage Operating Instructions = Handle Multiple-Supply Operation Constant Current Output, Voltage ControlAuto-Parallel Operation Series Operation 12. Auto-Parallel Operation13. Series Operation Monitor SignalsPage Using Appendix a VAC Input Power OptionGeneral Information Manual ChangesManual Changes Index Index United States Canada Agilent Sales and Support OfficeEurope Japan Latin America Australia/New ZealandManual Updates
Related manuals
Manual 126 pages 62.23 Kb

6015A, 6023A, 6028A, 6012B, 6011A, 6010a specifications

Agilent Technologies, a leader in the field of measurement and analysis, offers a suite of instruments within its 6010 and 6011 series, specifically the 6010A, 6011A, 6012B, and 6015A models. These devices are designed to meet the needs of various industries, including healthcare, environmental monitoring, and materials testing.

The Agilent 6010A is a high-performance spectrometer known for its precision and versatility. It utilizes advanced optical technologies to provide exceptional wavelength accuracy and resolution. This model is particularly useful in laboratories where reliable data is critical, offering a wide spectral range and effective noise reduction features. Its user-friendly interface simplifies complex analyses, making it suitable for both seasoned professionals and newcomers.

Following closely, the Agilent 6011A is recognized for its robust capabilities in laboratory environments. This device incorporates advanced signal processing techniques, enabling high-throughput measurements without compromising on quality. The 6011A is ideal for real-time monitoring applications, ensuring that users can make informed decisions based on accurate, timely data. Its comprehensive software suite is designed to enhance data analysis, allowing for seamless integration with existing laboratory workflows.

The 6012B variant enhances the functionality further by introducing additional features tailored for specific applications. With a focus on flexibility, the 6012B supports multiple measurement modes, including direct and differential detection. This model excels in complex measurements, allowing for greater analytical depth and insights. The built-in calibration options ensure consistent performance, making it a reliable choice for various research and development tasks.

Lastly, the Agilent 6015A model stands out with its leading-edge technology, designed for the most demanding applications. It boasts enhanced sensitivity and an improved dynamic range, making it perfect for trace analysis in challenging environmental samples. The 6015A’s advanced reporting tools provide detailed analytics, helping scientists and researchers interpret results efficiently. Its compact design also makes it suitable for laboratory spaces with limited room, without sacrificing performance.

Together, these models showcase Agilent Technologies' commitment to delivering high-quality, innovative solutions that empower users to achieve their analytical goals effectively and efficiently. Whether in a research, clinical, or industrial setting, the 6010A, 6011A, 6012B, and 6015A continue to set standards in precision instrumentation.
Top Page Image Contents