Agilent Technologies 6012B, 6010a, 6011A Installation, Initial Inspection, Preparation for Use

Page 17

2

Installation

Introduction

This section contains instructions for checking and repackaging the supply; bench or rack mounting, connecting the supply to ac input power, and converting the supply from one line voltage to another if required..

Note: All power supplies generate magnetic fields that may affect the operation of other instruments. If your instrument is susceptible to operating magnetic fields, do not locate it in the immediate vicinity of the power supply. Typically, at three inches from the supply, the electromagnetic field is less than 5 gauss.

Many CRT’s, such as those used in computer displays, are susceptible to magnetic fields much lower than 5 gauss. Check susceptibility before mounting any display near the power supply.

Initial Inspection

Before shipment, this supply was inspected and found to be free of mechanical and electrical defects. As soon as the supply is unpacked, inspect for any damage that may have occurred in transit. Save all packing materials until the inspection is completed. If damage is found, file a claim with the carrier immediately. The Agilent Technologies Sales and Support office should be notified as soon as possible.

Mechanical Check

This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and scratches, and that the meter face and rear-panel plastic covers are not scratched or cracked.

Electrical Check

Section III contains an abbreviated check that can be used quickly to place the supply into operation. Refer to the inside cover page of the manual for Certification and Warranty statements.

Preparation for Use

In order to be put into service, the power supply must be connected to an appropriate ac input power source. Also, the line voltage for which the supply is set must be checked. Additional steps may include line voltage conversion and rack mounting. Do not apply power to the supply before reading the “Input Power Requirements” section in this chapter.

Location and Cooling

The supply is fan cooled and must be installed with sufficient space in the rear and on sides for airflow. It should be used in an area where the ambient temperature does not exceed + 50 °C (55 °C for models 6023Aand 6028A).

Caution: When mounting several units in an enclosed rack, care should be taken to insure there is sufficient airflow through the enclosure. Failure to provide sufficient airflow may result in damage to the power supply or other equipment in the enclosure.

Installation 17

Image 17
Contents USER’S Guide Certification Safety Summary Safety Symbols Manufacturer’s Name and Address Safety InformationProduct Names Model NumbersManufacturer’s Declaration HerstellerbescheinigungTable Of Contents Index VAC Input Power OptionGeneral Information Safety ConsiderationsIntroduction DescriptionOption Description AccessoriesFor Agilent Models 6023A and 6028A Agilent Part No DescriptionOrdering Additional Manuals Related Documents SpecificationsInstrument and Manual Identification Supplemental Characteristics Agilent Technologies Model Performance Specifications6010A 6011A6015A 6012B6023A 6028ATemperature Rating C Supplemental CharacteristicsShipping CertificationOutput Characteristic Curve General Information Output Impedance General Information Preparation for Use InstallationInitial Inspection Rack Mounting Outline DiagramsInput Power Requirements Agilent Models 6023A and 6028A Power ConnectionAgilent Models 6010A, 6011A, 6012B and 6015A Line Voltage Option Conversion Agilent 6010A, 6011A, 6012B Line Voltage Conversion Components Installation Model Voltage AC Line Impedance CheckRepackaging for Shipment Agilent Model 6023A and 6033A Rear Panel Screw Sizes and Part NumbersDescription Agilent Part number Operating Instructions Front-Panel Controls and Indicators Operating InstructionsDisplay OVP Turn-On Checkout ProcedureOperating Instructions Connecting the Load Initial Setup and InterconnectionsWire Size Maximum Wire Lengths To Limit Voltage DropsStranded Copper Wire Ampacity Protective Shutdown Connecting a Bypass Capacitor Overvoltage Protection OVPOperating Modes Normal ModeDetermining Operating Point Overrange Operation Constant Voltage Operation Constant Current Operation Remote Voltage SensingBoth Voltage change due to open sense leadConstant Voltage Output, Resistance Control Analog ProgrammingVoltage Programming of Output Voltage Operating Instructions = Handle Auto-Parallel Operation Multiple-Supply OperationConstant Current Output, Voltage Control Series Operation 12. Auto-Parallel Operation13. Series Operation Monitor SignalsPage Using Appendix a VAC Input Power OptionGeneral Information Manual ChangesManual Changes Index Index United States Canada Agilent Sales and Support OfficeEurope Japan Latin America Australia/New ZealandManual Updates
Related manuals
Manual 126 pages 62.23 Kb

6015A, 6023A, 6028A, 6012B, 6011A, 6010a specifications

Agilent Technologies, a leader in the field of measurement and analysis, offers a suite of instruments within its 6010 and 6011 series, specifically the 6010A, 6011A, 6012B, and 6015A models. These devices are designed to meet the needs of various industries, including healthcare, environmental monitoring, and materials testing.

The Agilent 6010A is a high-performance spectrometer known for its precision and versatility. It utilizes advanced optical technologies to provide exceptional wavelength accuracy and resolution. This model is particularly useful in laboratories where reliable data is critical, offering a wide spectral range and effective noise reduction features. Its user-friendly interface simplifies complex analyses, making it suitable for both seasoned professionals and newcomers.

Following closely, the Agilent 6011A is recognized for its robust capabilities in laboratory environments. This device incorporates advanced signal processing techniques, enabling high-throughput measurements without compromising on quality. The 6011A is ideal for real-time monitoring applications, ensuring that users can make informed decisions based on accurate, timely data. Its comprehensive software suite is designed to enhance data analysis, allowing for seamless integration with existing laboratory workflows.

The 6012B variant enhances the functionality further by introducing additional features tailored for specific applications. With a focus on flexibility, the 6012B supports multiple measurement modes, including direct and differential detection. This model excels in complex measurements, allowing for greater analytical depth and insights. The built-in calibration options ensure consistent performance, making it a reliable choice for various research and development tasks.

Lastly, the Agilent 6015A model stands out with its leading-edge technology, designed for the most demanding applications. It boasts enhanced sensitivity and an improved dynamic range, making it perfect for trace analysis in challenging environmental samples. The 6015A’s advanced reporting tools provide detailed analytics, helping scientists and researchers interpret results efficiently. Its compact design also makes it suitable for laboratory spaces with limited room, without sacrificing performance.

Together, these models showcase Agilent Technologies' commitment to delivering high-quality, innovative solutions that empower users to achieve their analytical goals effectively and efficiently. Whether in a research, clinical, or industrial setting, the 6010A, 6011A, 6012B, and 6015A continue to set standards in precision instrumentation.