Airlink101 APSUSB201W manual Configuring Wireless Printing, Infrastructure Mode Printing

Page 16

8. Configuring Wireless Printing

8.1 Infrastructure Mode Printing

The following section describes how to setup the Print Server for wireless printing. It is strongly recommended that you test the Print Server with a wired connection first before moving on to configure wireless printing.

Note: You should use a wired connection to configure the following wireless settings before unplugging the network cable from the Print Server.

Step 1 Open the web browser and type in the IP address of your Print Server. (Default is 192.168.1.254)

Step 2 Verify the Printer Status is On line.

Step 3 Click on Configuration and then Wireless.

15

Image 16

Contents Ver a Table of Contents Introduction Package ContentsSystem Requirements Hardware Installation Connecting the Print ServerInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Click on Start, Settings, Printers and Faxes Performing Operating System Print TestPage Infrastructure Mode Printing Configuring Wireless PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Using the Web Configuration Utility Click on the Show Web Setup button in PS UtilityManagement SystemWireless Network User Configuration Wireless Wireless Interface Advanced SettingSettings Open System, Shared Key, and Both WEP EncryptionTCP/IP Microsoft Network AppleTalkPrinting Control Define UsersMail Account MailMail Notification Snmp Tools Print TestMail Test E-mail Account Receive E-mailReset Factory ResetFirmware Upgrade Backup Backup Device Configuration to FileRestore Device Configuration from File HelpUsing Rendezvous Printing in Mac OSPage Page Setting AppleTalk/LPR Printing For Mac OSPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Product Specifications Network Data Transfer Rate 100MbpsFlash ROM 2MB Standard SnmpAppendix Technical Support