Airlink101 APSUSB201W manual Hardware Installation, Connecting the Print Server

Page 4

2 Hardware Installation

2.1 Connecting the Print Server

Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any other USB device to the Print Server may damage the Print Server.

Note: Do not plug the power cord to the Print Server until you have reached Step 4 of this section.

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a wireless router. You may disconnect the Ethernet cable after a wireless connection is established.

Step 2 Make sure the printer is powered OFF, then connect one end of the USB cable to the USB port of the Print Server and attach the other end of the cable to the USB port of the printer.

Step 3 Power ON the printer.

Step 4 Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

3

Image 4

Contents Ver a Table of Contents Introduction Package ContentsSystem Requirements Hardware Installation Connecting the Print ServerInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Click on Start, Settings, Printers and Faxes Performing Operating System Print TestPage Infrastructure Mode Printing Configuring Wireless PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Using the Web Configuration Utility Click on the Show Web Setup button in PS UtilityManagement SystemWireless Network User Configuration Wireless Wireless Interface Advanced SettingSettings Open System, Shared Key, and Both WEP EncryptionTCP/IP Microsoft Network AppleTalkPrinting Control Define UsersMail Account MailMail Notification Snmp Tools Print TestMail Test E-mail Account Receive E-mailReset Factory ResetFirmware Upgrade Backup Backup Device Configuration to FileRestore Device Configuration from File HelpUsing Rendezvous Printing in Mac OSPage Page Setting AppleTalk/LPR Printing For Mac OSPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Product Specifications Network Data Transfer Rate 100MbpsFlash ROM 2MB Standard SnmpAppendix Technical Support