Airlink101 APSUSB201W manual

Page 17

Step 4 If you are printing through a wireless router, make sure the Connection Mode is set to Infrastructure.

Step 5 Type in the SSID (network name) of your wireless router in the SSID field, or use the drop-down menu directly below the SSID field to choose your wireless router.

Note: you can also click on the Site Survey button to view all the available wireless network. If you do not see your wireless router, clilck on Refersh and/or reset your wireless router.

Step 6 Click Save to save the settings.

16

Image 17

Contents Ver a Table of Contents System Requirements Package ContentsIntroduction Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Click on Configuration and then Wireless Configuring Wireless PrintingInfrastructure Mode Printing Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilitySystem ManagementWireless Network User Configuration Wireless Advanced Setting Wireless InterfaceSettings Open System, Shared Key, and Both WEP EncryptionTCP/IP AppleTalk Microsoft NetworkDefine Users Printing ControlMail Notification MailMail Account Snmp Print Test ToolsReceive E-mail Mail Test E-mail AccountFactory Reset ResetFirmware Upgrade Backup Device Configuration to File BackupRestore Device Configuration from File HelpPrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 100Mbps Product SpecificationsFlash ROM 2MB Standard SnmpTechnical Support Appendix