Airlink101 APSUSB201W manual Configuring Network Setting

Page 7

4. Configuring Network Setting

Before configuring the Print Server’s network setting, please take note of your computer’s TCP/IP setting.

Step 1 Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK.

Step 2 At the command prompt, type ipconfig and press Enter.

Step 3 Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will need these information later.

Step 4 Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.

Step 5 Make sure the Print Server is listed under the Device Name and click on Change IP Address.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Ver a Table of Contents Introduction Package ContentsSystem Requirements Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Infrastructure Mode Printing Configuring Wireless PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilitySystem ManagementWireless Network User Configuration Wireless WEP Encryption Wireless InterfaceAdvanced Setting Settings Open System, Shared Key, and BothTCP/IP AppleTalk Microsoft NetworkDefine Users Printing ControlMail Account MailMail Notification Snmp Print Test ToolsReceive E-mail Mail Test E-mail AccountFactory Reset ResetFirmware Upgrade Help BackupBackup Device Configuration to File Restore Device Configuration from FilePrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Standard Snmp Product SpecificationsNetwork Data Transfer Rate 100Mbps Flash ROM 2MBTechnical Support Appendix
Top Page Image Contents