Airlink101 APSUSB201W manual For Mac OS, To set up the Print Server for AppleTalk printing

Page 46

For Mac OS 9

If you use Mac OS 9, you can use the AppleTalk network protocol using the EtherTalk transport or a proprietary low-speed LocalTalk transport. Your Print Server can be used for network printing to PostScript printers. You can print from any Mac OS computer connected to your Ethernet network either directly using an EtherTalk connection or indirectly through a LocalTalk-to-EtherTalk router.

To set up the Print Server for AppleTalk printing:

Step 1 Please confirm that the AppleTalk protocol is enabled in your Macintosh computer.

Step 2 Change the IP Address on one of the computers within your network to 192.168.1.x (where x is any number between 2 - 200).

Step 3 Type the Print Server’s IP address into the address field of your web browser. (Default IP Address is 192.168.1.254).

Step 4 Click on Configuration and go to the AppleTalk Protocol page. If your AppleTalk network is divided into AppleTalk zones, you have to specify which zone the Print Server should be in. You should locate the Print Server in the same zone as most of the users who will be using it. If your network is not divided into zones, it should contain a single asterisk “*”.

45

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Ver a Table of Contents Introduction Package ContentsSystem Requirements Hardware Installation Connecting the Print ServerInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Click on Start, Settings, Printers and Faxes Performing Operating System Print TestPage Infrastructure Mode Printing Configuring Wireless PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Using the Web Configuration Utility Click on the Show Web Setup button in PS UtilityManagement SystemWireless Network User Configuration Wireless Settings Open System, Shared Key, and Both Wireless InterfaceAdvanced Setting WEP EncryptionTCP/IP Microsoft Network AppleTalkPrinting Control Define UsersMail Account MailMail Notification Snmp Tools Print TestMail Test E-mail Account Receive E-mailReset Factory ResetFirmware Upgrade Restore Device Configuration from File BackupBackup Device Configuration to File HelpUsing Rendezvous Printing in Mac OSPage Page Setting AppleTalk/LPR Printing For Mac OSPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Flash ROM 2MB Product SpecificationsNetwork Data Transfer Rate 100Mbps Standard SnmpAppendix Technical Support
Top Page Image Contents