Airlink101 APSUSB201W manual Using the PS Utility

Page 21

9. Using the PS Utility

PS Utility is a user-friendly program that allows you to configure some basic functions of the Print Server such as performing a factory reset or updating the firmware. To access the complete management features of the Print Server, you’ll need to use the Web Configuration Utility, which is described in the next section.

Note: If you haven’t installed PS Utility yet, please follow the installation instructions as described in Section 3, Installing PS Utility.

You can start PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.

Device Name: Lists any Print Server that is connected on your network.

Information: Displays the basic information for the selected Print Server.

Discover Device: Click on this button to automatically search for any Print Server that is connected to your network.

Change IP Address: Click on this button to change the IP Address and other TCP/IP settings for the Print Server.

Update Firmware: Click on this button to update the Print Server’s firmware.

Note: You must download the updated firmware from www.airlink101.com first.

Show Web Setup: Click on this button to display the Web Configuration Utility.

Factory Reset: Click on this button to reset the Print Server back to factory settings.

About: Click on this button to display the version number of the PS Utility.

Close: Click on this button to close PS Utility.

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Ver a Table of Contents Package Contents IntroductionSystem Requirements Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Configuring Wireless Printing Infrastructure Mode PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilitySystem ManagementWireless Network User Configuration Wireless Advanced Setting Wireless InterfaceSettings Open System, Shared Key, and Both WEP EncryptionTCP/IP AppleTalk Microsoft NetworkDefine Users Printing ControlMail Mail AccountMail Notification Snmp Print Test ToolsReceive E-mail Mail Test E-mail AccountFactory Reset ResetFirmware Upgrade Backup Device Configuration to File BackupRestore Device Configuration from File HelpPrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 100Mbps Product SpecificationsFlash ROM 2MB Standard SnmpTechnical Support Appendix
Top Page Image Contents