Airlink101 APSUSB201W manual Wireless Interface, WEP Encryption, Advanced Setting

Page 29

Wireless Interface

Connection Mode: Select one of the two connection modes.

•Infrastructure (default) – Connects to a wireless AP or router in a WLAN.

•Ad-Hoc– Connects directly to wireless clients in a peer-to-peer mode.

Note: For Ad-Hoc mode, all clients including the Print Server must use the same SSID and channel number to establish proper connection. In addition, if WEP is enabled, all clients and Print Server must use the identical WEP key and key number.

•SSID: Assign the SSID in this box. You can manually input the name or select one from the drop-down menu. To search for any available wireless AP within the network, click the Site Survey button.

•Wireless Channel: Select the channel from the drop-down menu. The default channel is 11.

•Transmission Rate: Select the data transmission rate from the drop-down menu. The default setting is Fully Automatic.

WEP Encryption

This field allows you to configure the settings of data encryption. Please remember that the WEP key must be set before the data encryption is enforced.

•WEP Encryption: This option allows you to select Disable, 64 bits, and 128 bits for the encryption setting.

•WEP Key Format: You can decide the network key to be encoded by ASCII (all letters and numbers) or HEX (0-9, A-F).

•64-bit(10 Hex/5 ASCII characters), 128-bit(26 Hex/13 ASCII characters).

Then, enter the key(s) for the network in the Key box (1~4). The WEP encryption must be the same for all wireless devices on your network.

Advanced Setting

This field allows you to configure more settings, including:

•Beacon Interval: Enter the number of beacon interval time in milliseconds.

•Preamble: This option allows you to set the length of preamble. Setting options

are: Long - it is set to 144 bits; Short - it is set to 72 bits.

•Authentication Type: You can set the authentication type by selecting the

settings: Open System, Shared Key, and Both.

Click Save to save and activate any configuration changes. Click Cancel to cancel the changes.

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Ver a Table of Contents System Requirements Package ContentsIntroduction Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Click on Configuration and then Wireless Configuring Wireless PrintingInfrastructure Mode Printing Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilitySystem ManagementWireless Network User Configuration Wireless Advanced Setting Wireless InterfaceSettings Open System, Shared Key, and Both WEP EncryptionTCP/IP AppleTalk Microsoft NetworkDefine Users Printing ControlMail Notification MailMail Account Snmp Print Test ToolsReceive E-mail Mail Test E-mail AccountFactory Reset ResetFirmware Upgrade Backup Device Configuration to File BackupRestore Device Configuration from File HelpPrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 100Mbps Product SpecificationsFlash ROM 2MB Standard SnmpTechnical Support Appendix
Top Page Image Contents