Airlink101 APSUSB201W manual Configuration, System

Page 27

10.2 Configuration

Click on Configuration to display the Configuration page.

System

The System page allows you to configure basic settings of the Print Server.

Server Name: You can rename the Print Server to a more user-friendly name or keep the factory default name.

Location: You can make note of where the Print Server is located (optional).

Admin Contact: Name of the administrator to contact for help (optional).

Password: You can set a password for the Web Configuration Utility so only authorized personnel can access and change the Print Server’s configuration.

USB Port Name: You can rename the Print Server’s port name to a more user-friendly name or keep the factory default name.

Description: Describe the printer that is attached to the Print Server (optional).

PJL Printer: Choosing Yes will enable the support for Hewlett-Packard PJL (Printer Job Language) standard for bi-directional printing. (Default is No).

Click Save to save and activate any configuration changes. Click Cancel to cancel the changes.

26

Image 27

Contents Ver a Table of Contents Package Contents IntroductionSystem Requirements Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Configuring Wireless Printing Infrastructure Mode PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration UtilitySystem ManagementWireless Network User Configuration Wireless WEP Encryption Wireless InterfaceAdvanced Setting Settings Open System, Shared Key, and BothTCP/IP AppleTalk Microsoft NetworkDefine Users Printing ControlMail Mail AccountMail Notification Snmp Print Test ToolsReceive E-mail Mail Test E-mail AccountFactory Reset ResetFirmware Upgrade Help BackupBackup Device Configuration to File Restore Device Configuration from FilePrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Standard Snmp Product SpecificationsNetwork Data Transfer Rate 100Mbps Flash ROM 2MBTechnical Support Appendix