GBC 640T operation manual Table of Contents

640t – Installation and Operating Instructions

Table of Contents

1. Safety		E. Unwind/Supply Shaft	5-5
		Power	5-6
Warnings	1-1	A. On/Off Power Switch	5-6
General	1-1	B. Circuit Breaker	5-6
Electrical	1-2	C. Nomenclature Plate	5-6
2. Warranty		Power Cord and Foot Switch	5-6
		A. Power Cord	5-6
		B. Foot Switch	5-6
Limited 90-Day Warranty	2-1	Control Panel	5-7
For European Union Residents Only	2-1	Temp Section	5-7
3. Specifications		Speed Section	5-7
		6. Operation
Specifications	3-1
FCC Note	3-2	General Operation	6-1
Canada Class A Notice - Avis Canada, Classe A ..	3-2	Loading Film	6-2
Modifications	3-2	Removing and Installing the Print Clamp	6-3
4. Installation		Removing and Installing the Feed Table	6-3
		Loading Film Onto the Supply Shafts	6-4
		Threading Film with a Threading Card	6-5
Prior to Installation	4-1	Loading Film by Tacking New Film to Existing Film.6-7
Installation	4-1	Decaling in Two Passes	6-8
5. Feature guide		Mounting	6-9
		Tips For Threading Pressure Sensitive Adhesive
		(PSA) Film	6-9
Film Shafts	5-1	Pre-Coating Boards	6-9
Idler Bars	5-2	Mounting Only	6-9
A. Upper Idler	5-2	Film Alignment and Tension	6-10
B. Lower Idler	5-2	Film Alignment	6-10
Rollers and Safety Sensor	5-2	Film Tension	6-10
A. Upper Main Roller	5-2	Clearing a Film Jam (Wrap-up)	6-11
B. Lower Main Roller	5-2	Lamination Guide	6-12
C. Safety Sensor	5-2	7. Operator Maintenance
Emergency Stop and Table	5-3
A. Table Interlock Hole	5-3
B. Table Interlock	5-3	Caring for the 640t Laminator	7-1
C. Emergency Stop	5-3	Cleaning The Rollers	7-1
D. Front Feed Table	5-3	Troubleshooting	7-2
Control Panel and Print Clamp	5-3	Notes	7-3
A. Control Panel & Display	5-3
B. Print Clamp Lock Release Latch	5-3
Tension Controls	5-4
A. Release Liner Tension Knob	5-4
B. Upper Film Tension Knob and Brake	5-4
C. Media Rewinder Tension Knob	5-4
D. Lower Film Tension Knob and Brake	5-4
Roller Pressure Handle	5-4
A. Mounting & Laminating Presets	5-4
B. Roller Pressure Handle	5-4
Media Core Adapter	5-5
Rewinder	5-5
A. Rewinder Core Adapters	5-5
B. Rewinder Shaft	5-5
C. Rewinder Cardboard Tube	5-5
D. Core Chucks	5-5

Page i