Delta Electronics VFD-G manual Content Address Function

Chapter 4 Parameters

Content	Address	Function
Status monitor	2100H	Fault code:
Read only
		00: No error occurred
		01: Over-current (oc)
		02: Over-voltage (ov)
		03: Overheat (oH)
		04: Overload (oL)
		05: Overload1 (oL1)
		06: External fault (EF)
		07: IGBT short circuit protection (occ)
		08: CPU failure (cF3)
		09: Hardware protection failure (HPF)
		10: Current exceeds 2 times rated current during accel (ocA)
		11: Current exceeds 2 times rated current during decel (ocd)
		12: Current exceeds 2 times rated current during steady
		state operation (ocn)
		13: Ground Fault (GFF)
		14: Low voltage (Lv)
		15: CPU failure 1 (cF1)
		16: CPU failure 2 (cF2)
		17: Base Block (bb)
		18: Overload (oL2)
		19: Auto accel/decel failure (cFA)
		20: Software protection enabled (codE)
		21: EF1 Emergency stop
		22: PHL (Phase-Loss)
		23: Lc (Low-current)
		24: FbL(Feedback Loss)
		25: Reserved
		26: Fan Power Fault (FANP)
		27: Fan 1 Fault (FF1)
		28: Fan 2 Fault (FF2)
		29: Fan 3 Fault (FF3)
		30: Fan 1, 2, 3 Fault (FF123)
		31: Fan 1, 2 Fault (FF12)
		32: Fan 1, 3 Fault (FF13)
		33: Fan 2, 3 Fault (FF23)
		34: Gate Drive Low Voltage Protect (Fv)

4-82 Revision July 2008, EG03, SW V1.06