Delta Electronics VFD-G manual Parameter

Chapter 4 Parameters

	Parameter	Functions	Settings	Factory	Customer
				Setting
			31: FF12 (Fan 1, 2 Fault)
			32: FF13 (Fan 1, 3 Fault)
			33: FF23 (Fan 2, 3 Fault)
			34: Fv (Gate Drive Low Voltage Protect)
			35~40: Reserved
			41: HPF1 (GFF hardware error)
			42: HPF2 (CC,OC hardware error)
			43: HPF3 (OC hardware error)
			44: HPF4 (OV hardware error)
			45: CF3.3 (U-phase error)
			46: CF3.4 (V-phase error)
			47: CF3.5 (W-phase error)
			48: CF3.6 (OV or LV)
			49: CF3.7 (Isum error)
			50: CF3.8 (Temperature sensor error)
06-15		Parameter Reset	00~65535	00
			09: Reset parameters (50Hz, 380)
			10: Reset parameters (60Hz, 440)
06-16		Parameter Protection	00~65535	00
		Password Input
06-17		Parameter Protection	00~65535	00
		Password Setting	00: No password protection
Group 7 AC Drive and Motor Parameters
	Parameter	Functions	Settings	Factory	Customer
				Setting
07-00		Identity Code of AC	Display by model type	##
		Drive
07-01		Rated Current of AC	Display by model type	##
		Drive
07-02		Full-load Current of	30~120%	100%
		Motor
07-03		No-load Current of	1~99%	30%
		Motor
07-04		Auto Slip	0.0~3.0	0.0
		Compensation Gain
07-05		Rated Slip Frequency	0.00~20.00Hz	0.00
		of Motor
07-06		Auto Torque	0.0~10.0	0.0
		Compensation Gain
07-07		Torque Compensation	0.0~10.0	0.0
		Gain by Manually

Revision July 2008, EG03, SW V1.06 4-13