Appendix B Accessories
Display Message
Descriptions
The actual value stored in the specified parameter.
External Fault
“End” displays for approximately 1 second if the entered input data have been accepted. After a parameter value has been set, the new value is automatically stored in memory. To modify an entry, use the
or 
keys.
“Err” displays if the input is invalid.
Communication Error. Please check the AC motor drive user manual (Chapter 4, Group 9 Communication Parameter) for more details.
B.6.3 PU06 Operation Flow Chart
Or
XX
XX-XX 
Press UP key to select SAVE or READ. Press PROG/DATA for about 2 seconds or until it is flashing, then save parameters from PU06 to
AC drive or read parameters from AC drive to PU06.
XXXXX
Cannot | Succeed to |
write in | Write in |
Revision July 2008, EG03, SW V1.06 |
