Chapter 4 Parameters |
|
|
| |
|
|
| ||
Group 5: |
| |||
|
|
| ||
05 - 00 | 1st Step Speed Frequency | Unit: 0.01 | ||
05 - 01 | 2nd Step Speed Frequency | Unit: 0.01 | ||
|
|
| ||
05 - 02 | 3rd Step Speed Frequency | Unit: 0.01 | ||
05 - 03 | 4th Step Speed Frequency | Unit: 0.01 | ||
|
|
| ||
05 - 04 | 5th Step Speed Frequency | Unit: 0.01 | ||
05 - 05 | 6th Step Speed Frequency | Unit: 0.01 | ||
05 - 06 | 7th Step Speed Frequency | Unit: 0.01 | ||
05 - 07 | 8th Step Speed Frequency | Unit: 0.01 | ||
05 - 08 | 9th Step Speed Frequency | Unit: 0.01 | ||
05 - 09 | 10th Step Speed Frequency | Unit: 0.01 | ||
05 - 10 | 11th Step Speed Frequency | Unit: 0.01 | ||
05 - 11 | 12th Step Speed Frequency | Unit: 0.01 | ||
05 - 12 | 13th Step Speed Frequency | Unit: 0.01 | ||
05 - 13 | 14th Step Speed Frequency | Unit: 0.01 | ||
05 - 14 | 15th Step Speed Frequency | Unit: 0.01 | ||
| Settings | 0.00~160.00 Hz | Factory Setting: 0.00 | |
|
|
|
|
|
The
05 - 15 PLC Mode
|
| Factory Setting: 00 |
Settings | 00 | Disable PLC operation |
| 01 | Execute one program cycle only |
| 02 | Continuously execute program cycles |
| 03 | Execute one program cycle only and step by step |
| 04 | Continuously execute program cycles step by step |
|
|
|
This parameter selects the mode of PLC operation for the AC drive. The AC drive will change speeds and directions according to the user’s desired programming.
Revision July 2008, EG03, SW V1.06 |
