Delta Electronics VFD-G manual Parameters

Chapter 4 Parameters

Group 4 Input Function Parameters

	Parameter	Functions	Settings	Factory	Customer
				Setting
04-00		Multi-function Input	00: disabled	01
		Terminal 1	01: Multi-Speed terminal 1
04-01		Multi-function Input	02: Multi-Speed terminal 2	02
		Terminal 2	03: Multi-Speed terminal 3
04-02		Multi-function Input	04: Multi-Speed terminal 4	03
		Terminal 3	05: Reset (NO)
04-03		Multi-function Input	06: Reset (NC)	04
		Terminal 4	07: Jog operation (JOG)
			08: Accel/Decel disabled
			09: 1st and 2nd Accel/Decel selection
			10: 3rd and 4th Accel/Decel selection
			11: B.B. (NO) input
			12: B.B. (NC) input
			13: Increase Frequency
			14: Decrease Frequency
			15: Emergency stop (NO)
			16: Emergency stop (NC)
			17: KEYPAD(open), EXT(close)
			18: PID disable
			19: Run PLC Program
			20: Pause PLC Program
			21: 1st Output Frequency Gain (Pr.04-30)
			22: 2nd Output Frequency Gain (Pr.04-31)
			23: 3rd Output Frequency Gain (Pr.04-32)
04-04		Digital Input Terminal	01~20	01
		Response Time
04-05		Minimum AI1 Analog	0 ~ 100%	0
		Input
04-06		Maximum AI1 Analog	0 ~ 100%	100
		Input
04-07		Minimum Output that	0.00~100.00%	0.00
		corresponds to AI1
04-08		Maximum Output that	0.00~100.00%	100.00
		corresponds to AI1
04-09		Minimum AI2 Analog	0 ~ 100%	0
		Input
04-10		Maximum AI2 Analog	0 ~ 100%	100
		Input
04-11		Minimum Output that	0.0~100.0%	0.00
		corresponds to AI2
04-12		Maximum Output that	0.0~100.0%	100.00
		corresponds to AI2
04-13		1st AI1 Gain	0.0~100.0%	100.0

4-8 Revision July 2008, EG03, SW V1.06