Delta Electronics VFD-G manual Parameter, Functions, Settings, Factory, Customer

Chapter 4 Parameters

	Parameter	Functions	Settings	Factory	Customer
				Setting
09-05		Even/Odd Parity and	00: None parity + 2 stop bit	00
		Stopping Parity Setting	01: Even parity + 2 stop bit
			02: Odd parity + 2 stop bit
			03: None parity + 1 stop bit
			04: Even parity + 1 stop bit
			05: Odd parity + 1 stop bit
09-06		Communication	Bit0~1: 00: Disable	00
		Operation Command 1	01: Stop
			10: Start-up
			11: JOG start-up
			Bit2~3: Reserved
			Bit4~5: 00: No function
			01: FWD command
			10: REV command
			11: Change direction command
			Bit6~7: 00: 1st step accel/decel speed
			01: 2nd step accel/decel speed
			10: 3rd step accel/decel speed
			11: 4th step accel/decel speed
			Bit8~11:
			0000: Master speed
			0001: 1st step speed
			0010: 2nd step speed
			0011: 3rd step speed
			0100: 4th step speed
			0101: 5th step speed
			0110: 6th step speed
			0111: 7th step speed
			1000: 8th step speed
			1001: 9th step speed
			1010: 10th step speed
			1011: 11th step speed
			1100: 12th step speed
			1101: 13th step speed
			1110: 14th step speed
			1111: 15th step speed
			Bit12: Select Bit6~11 function
			Bit13~15 Reserved
09-07		Communication	0~160.00Hz	60.00
		Frequency Setting
09-08		Communication	Bit0: 1: EF ON	00
		Operation Command 2	Bit1: 1: Reset
			Bit2: 0: BB OFF, 1: BB ON
			Bit3~15: Reserved

4-16 Revision July 2008, EG03, SW V1.06