Delta Electronics VFD-G manual Parameters

Chapter 4 Parameters
05 - 17	Time Duration of 1st Step Speed		Unit: 1 /0.1sec
05 - 18	Time Duration of 2nd Step Speed		Unit: 1 /0.1sec
05 - 19	Time Duration of 3rd Step Speed		Unit: 1 /0.1sec
05 - 10	Time Duration of 4th Step Speed		Unit: 1 /0.1sec
05 - 21	Time Duration of 5th Step Speed		Unit: 1 /0.1sec
05 - 22	Time Duration of 6th Step Speed		Unit: 1 /0.1sec
05 - 23	Time Duration of 7th Step Speed		Unit: 1 /0.1sec
05 - 24	Time Duration of 8th Step Speed		Unit: 1 /0.1sec
05 - 25	Time Duration of 9th Step Speed		Unit: 1 /0.1sec
05 - 26	Time Duration of 10th Step Speed		Unit: 1 /0.1sec
05 - 27	Time Duration of 11th Step Speed		Unit: 1 /0.1sec
05 - 28	Time Duration of 12th Step Speed		Unit: 1 /0.1sec
05 - 29	Time Duration of 13th Step Speed		Unit: 1 /0.1sec
05 - 30	Time Duration of 14th Step Speed		Unit: 1 /0.1sec
05 - 31	Time Duration of 15th Step Speed		Unit: 1 /0.1sec
	Settings	0.0~65500 Sec / 0.0~6550.0 Sec	Factory Setting: 0.0

Pr.05-17 to Pr.05-31 correspond to operation time of each step speed defined by Pr.05-00 to Pr.05-14. The maximum setting 65500 seconds will be displayed as t6550. If it is displayed t6550. that means 6550 seconds.

Note: If a parameter is set to “00” (0 sec), the corresponding step will be skipped. This is commonly used to reduce the number of program steps.

4-50 Revision July 2008, EG03, SW V1.06