Delta Electronics VFD-G manual Address list

Chapter 4 Parameters

3.5Address list:

The contents of available addresses are shown as below:

Content	Address		Function
AC drive	GGnnH	GG means parameter group, nn means parameter number,
Parameters		for example, the address of Pr 04-01 is 0401H. Refer to
		chapter 5 for the function of each parameter. When reading
		parameter by command code 03H, only one parameter can
		be read for one time.
Command	2000H	Bit 0-1	00B: Disabled
Write only			01B: Stop
			10B: Run
			11B: Jog + Run
		Bit 2-3	Reserved
		Bit 4-5	00B: Disabled
			01B: FWD command
			10B: REV command
			11B: Direction change command
		Bit 6-7	00B: 1st step acce/decel speed
			01B: 2nd step acce/decel speed
			10B: 3rd step acce/decel speed
			11B: 4th step acce/decel speed
		Bit 8-11	0000B: Master speed
			0001B: 1st step speed
			0010B: 2nd step speed
			0011B: 3rd step speed
			0100B: 4th step speed
			0101B: 5th step speed
			0110B: 6th step speed
			0111B: 7th step speed
			1000B: 8th step speed
			1001B: 9th step speed
			1010B: 10th step speed
			1011B: 11th step speed
			1100B: 12th step speed
			1101B: 13th step speed
			1110B: 14th step speed
			1111B: 15th step speed
		Bit 12	Select Bit6~11 function
		Bit 13-15	Reserved
	2001H	Freq. command
	2002H	Bit 0	1: EF (external fault) on
		Bit 1	1: Reset
		Bit 2	0: BB OFF
			1: BB ON

Revision July 2008, EG03, SW V1.06 4-81