Oki 2024E manual Selecting/Using Labels, Label Parameters, Printing Labels

Page 14

Selecting/Using Labels

Label Parameters

Important!

Place labels in the MP Tray face up.

Caution!

Labels must be able to withstand 446°F (230°C) for 0.2 second, including mechanical pressures to 25 psi (1.8 kg/cm2).

Usable

 

 

Media

Media

Recommended

Feed Tray

Exit Tray

Type

Weight

Sizes

Labels

 

 

Setting

Setting

 

 

 

 

 

 

 

 

 

 

• Letter

MP Tray

Rear Only

Labels

• Medium

Avery 5161 White

• A4

Only

 

 

• Heavy

Laser Label, Letter

 

 

 

size

 

 

 

 

• Ultra

 

 

 

 

 

 

 

 

 

Heavy

 

 

 

 

 

 

 

Printing Labels

For Individual Print Jobs on Labels

Make the following settings in the printer driver as you print the job:

Source = MP Tray

Media Size = Letter or A4

Media Type = Labels

Windows® Adobe® PostScript® driver only: deselect Media Check (see page 12).

Making Labels the Default Print Media for the MP Tray

If the MP Tray will normally be loaded with labels, set the printer menu as follows (see page 6):

MP Tray PaperSize - Letter or A4

MP Tray MediaType = Labels

13

Image 14
Contents Page Contents Order Numbers Ordering Replacement SuppliesHow to Order Default Media Settings Media SettingsWhy Change Media Settings? Media Settings for Individual Print Jobs Ranges for Printer Media Weight SettingsTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Trays 1, 2To Set Transparencies as the Default Media Then, Set the Media Type Changing Default Media Settings Multi-Purpose MP TrayFirst, Check/Set the Media Size to Letter Default or A4 Then, Set the Media Weight Changing Default Media Settings Multi-Purpose TrayTo Set Labels or Heavy Paper as the Default Media First, Check/Set the MediaLoading Media Trays 1, 2 Sizes must be defined in driver before printingLoading Media Multi-Purpose MP Tray Selecting/Using Paper Specifications DefaultPrinting Transparencies Selecting/Using TransparenciesMaking Transparencies the Default Print Media For Individual Print Jobs on TransparenciesLabel Parameters Selecting/Using LabelsMaking Labels the Default Print Media for the MP Tray Printing LabelsParameters Selecting/Using Thick MediaSample Ream Label Printing Thick PaperPrinting Envelopes Selecting/Using EnvelopesMaking Envelopes Default Print Media for MP Tray To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Proof & Print Feature Ideas for Using Printer FeaturesSecure Print Feature Overlays FormsTo Delete Document before Printing It To Print a Confidential Document Using Control PanelSecure Print To Print a Proofed Document Using Control Panel Proof & PrintPrinting the File List Printing the Menu Defaults MenuMapPrinting Built-In Reports Printing the Demo Printing Lists of FontsSetting the Power Save Interval Setting Power Save ParametersPower Save To Disable/Enable Power SaveOn Line Button Control Panel ButtonsMenu Button Value + Button Item + ButtonItem Button Value ButtonSelect Button Cancel ButtonError Mode Attention light blinking Printer On LineControl Panel Lights Ready LED GreenClearing Media Jams JamCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside Jam 382 If the sheet is inside and caught in the fuserOpen Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Off Changing Toner CartridgesToner Cartridge Order #s Back On Error Messages On Line Fuser is not properly installed Press the on Line button Additional OKI Resources Service & SupportFirst …