Oki 2024E manual Control Panel Buttons, Menu Button, On Line Button

Page 24

Control Panel Buttons

MENU Button

Printer On Line or Off Line

Press to enter the Menu mode.

Menu Mode

•Press to advance to the next Category in the Menu

•Press and hold for 2 seconds or longer to go back to the previous Category.

Password (PIN) Mode

Press to enter a zero in the password.

ON LINE Button

Printer On Line/Off Line

Press to place the printer off line/on line.

Menu Mode

Press to exit the Menu mode and go back on line.

Password (PIN) Mode

Press to enter the number 4 in the password.

Error Mode

(Attention light blinking)

•If the paper size requested by the print job is different from the paper specified as in the tray, press ON LINE to force the job to print.

•If you have selected manual print in the driver, load paper in the MP tray, then press ON LINE to print the job.

23

Image 24

Contents Page Contents Ordering Replacement Supplies How to OrderOrder Numbers Media Settings Why Change Media Settings?Default Media Settings Media Settings for Individual Print Jobs Ranges for Printer Media Weight SettingsChanging Default Media Settings Trays 1, 2 To Set Transparencies as the Default MediaTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Multi-Purpose MP Tray First, Check/Set the Media Size to Letter Default or A4Then, Set the Media Type Changing Default Media Settings Multi-Purpose Tray To Set Labels or Heavy Paper as the Default MediaThen, Set the Media Weight First, Check/Set the MediaLoading Media Trays 1, 2 Sizes must be defined in driver before printingLoading Media Multi-Purpose MP Tray Selecting/Using Paper Specifications DefaultSelecting/Using Transparencies Making Transparencies the Default Print MediaPrinting Transparencies For Individual Print Jobs on TransparenciesSelecting/Using Labels Making Labels the Default Print Media for the MP TrayLabel Parameters Printing LabelsSelecting/Using Thick Media Sample Ream LabelParameters Printing Thick PaperSelecting/Using Envelopes Making Envelopes Default Print Media for MP TrayPrinting Envelopes To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Ideas for Using Printer Features Secure Print FeatureProof & Print Feature Overlays FormsTo Print a Confidential Document Using Control Panel Secure PrintTo Delete Document before Printing It To Print a Proofed Document Using Control Panel Proof & PrintPrinting the Menu Defaults MenuMap Printing Built-In ReportsPrinting the File List Printing the Demo Printing Lists of FontsSetting Power Save Parameters Power SaveSetting the Power Save Interval To Disable/Enable Power SaveControl Panel Buttons Menu ButtonOn Line Button Item + Button Item ButtonValue + Button Value ButtonCancel Button Error Mode Attention light blinkingSelect Button Printer On LineControl Panel Lights Ready LED GreenClearing Media Jams JamCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside Jam 382 If the sheet is inside and caught in the fuserOpen Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Changing Toner Cartridges Toner Cartridge Order #sOff Back On Error Messages On Line Fuser is not properly installed Press the on Line button Service & Support First …Additional OKI Resources