Oki 2024E manual Selecting/Using OKI Print Media

Page 17

Selecting/Using OKI® Print Media

OKI Synflex™*

Order # 52205901

Waterproof

Tearproof

White, 8½'' x 11'' (216 x 279 mm)

100 sheets/box

Use Printer Settings

•Feed Tray = MP Tray Only

•Exit Tray = Rear Only

•MediaType = Plain

•MediaWeight = Ultra Heavy

OKI Bright White

Proofing Paper*

Order # 52206101

White, 32-lb., 8½'' x 11''

500 sheets/box

Use Printer Settings

•Feed Tray = Any

•Exit Tray = Top or Rear

•MediaType = Plain

•MediaWeight = Auto

OKI Premium Envelopes

Order #s 52206301 (Box 100) 52206302 (Box 500)

COM-10 (#10), white wove

Security tinted, Redi-Strip seal

*For best results: temperature = 65 to 77°F; humidity = 40 to 65%RH

OKI Premium Color Transparencies

Order # 52205701

8½'' x 11'' (216 x 279 mm)'

50 sheets/box

Use Printer Settings

•Feed Tray: Tray 1 or MP Tray

•Exit Tray: Rear Only

•Media Type: Transparency

•Media Weight: Any (ignored)

OKI Premium Card Stock*

Weight	OKI Order #

60 lb. (Cover)	52205601

90 lb. (Index)	52205602

110 lb. (Index)	52205603

Acid-free archival quality

White, 8½'' x 11'' (216 x 279 mm)

250 sheets/box

Use Printer Settings

•Feed Tray: MP Tray Only

•Exit Tray: Rear Only

•Media Type: Plain

•Media Weight:

–60 lb. = Heavy

–90, 110 lb. = Ultra Heavy

To purchase OKI media, contact your local OKI dealer or visit us at

www.okidata.com.

16

Image 17

Contents Page Contents Order Numbers Ordering Replacement SuppliesHow to Order Default Media Settings Media SettingsWhy Change Media Settings? Ranges for Printer Media Weight Settings Media Settings for Individual Print JobsTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Trays 1, 2To Set Transparencies as the Default Media Then, Set the Media Type Changing Default Media Settings Multi-Purpose MP TrayFirst, Check/Set the Media Size to Letter Default or A4 To Set Labels or Heavy Paper as the Default Media Changing Default Media Settings Multi-Purpose TrayThen, Set the Media Weight First, Check/Set the MediaSizes must be defined in driver before printing Loading Media Trays 1, 2Loading Media Multi-Purpose MP Tray Selecting/Using Paper Default SpecificationsMaking Transparencies the Default Print Media Selecting/Using TransparenciesPrinting Transparencies For Individual Print Jobs on TransparenciesMaking Labels the Default Print Media for the MP Tray Selecting/Using LabelsLabel Parameters Printing LabelsSample Ream Label Selecting/Using Thick MediaParameters Printing Thick PaperMaking Envelopes Default Print Media for MP Tray Selecting/Using EnvelopesPrinting Envelopes To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Secure Print Feature Ideas for Using Printer FeaturesProof & Print Feature Overlays FormsTo Delete Document before Printing It To Print a Confidential Document Using Control PanelSecure Print Proof & Print To Print a Proofed Document Using Control PanelPrinting the File List Printing the Menu Defaults MenuMapPrinting Built-In Reports Printing Lists of Fonts Printing the DemoPower Save Setting Power Save ParametersSetting the Power Save Interval To Disable/Enable Power SaveOn Line Button Control Panel ButtonsMenu Button Item Button Item + ButtonValue + Button Value ButtonError Mode Attention light blinking Cancel ButtonSelect Button Printer On LineReady LED Green Control Panel LightsJam Clearing Media JamsCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside If the sheet is inside and caught in the fuser Jam 382Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Off Changing Toner CartridgesToner Cartridge Order #s Back On Error Messages On Line Fuser is not properly installed Press the on Line button Additional OKI Resources Service & SupportFirst …