Oki 2024E manual Item + Button, Item Button, Value + Button, Value Button

Page 25

Control Panel Buttons (cont.)

ITEM + Button

Menu Mode

•Press to advance to the next Item in the Menu.

•Press and hold to advance through the menu Items quickly.

Password (PIN) Mode

Press to enter the number 1 in the password

ITEM - Button

Menu Mode

•Press to go back to the previous Item in the Menu.

•Press and hold to advance backward through the menu Items quickly.

Password (PIN) Mode

Press to enter the number 5 in the password.

VALUE + Button

Menu Mode

Press to advance to the next Value for an Item in the Menu.

Press and hold to advance through the Values quickly.

Password (PIN) Mode

Press to enter the number 2 in the password.

VALUE - Button

Menu Mode

Press to go to the previous Value for an Item in the Menu.

Press and hold to advance backward through the Values quickly.

Password (PIN) Mode

Press to enter the number 6 in the password.

24

Image 25

Contents Page Contents How to Order Ordering Replacement SuppliesOrder Numbers Why Change Media Settings? Media SettingsDefault Media Settings Ranges for Printer Media Weight Settings Media Settings for Individual Print JobsTo Set Transparencies as the Default Media Changing Default Media Settings Trays 1, 2To Set Labels, Heavy Paper, etc., as Default Media First, Check/Set the Media Size to Letter Default or A4 Changing Default Media Settings Multi-Purpose MP TrayThen, Set the Media Type To Set Labels or Heavy Paper as the Default Media Changing Default Media Settings Multi-Purpose TrayThen, Set the Media Weight First, Check/Set the MediaSizes must be defined in driver before printing Loading Media Trays 1, 2Loading Media Multi-Purpose MP Tray Selecting/Using Paper Default SpecificationsMaking Transparencies the Default Print Media Selecting/Using TransparenciesPrinting Transparencies For Individual Print Jobs on TransparenciesMaking Labels the Default Print Media for the MP Tray Selecting/Using LabelsLabel Parameters Printing LabelsSample Ream Label Selecting/Using Thick MediaParameters Printing Thick PaperMaking Envelopes Default Print Media for MP Tray Selecting/Using EnvelopesPrinting Envelopes To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Secure Print Feature Ideas for Using Printer FeaturesProof & Print Feature Overlays FormsSecure Print To Print a Confidential Document Using Control PanelTo Delete Document before Printing It Proof & Print To Print a Proofed Document Using Control PanelPrinting Built-In Reports Printing the Menu Defaults MenuMapPrinting the File List Printing Lists of Fonts Printing the DemoPower Save Setting Power Save ParametersSetting the Power Save Interval To Disable/Enable Power SaveMenu Button Control Panel ButtonsOn Line Button Item Button Item + ButtonValue + Button Value ButtonError Mode Attention light blinking Cancel ButtonSelect Button Printer On LineReady LED Green Control Panel LightsJam Clearing Media JamsCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside If the sheet is inside and caught in the fuser Jam 382Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Toner Cartridge Order #s Changing Toner CartridgesOff Back On Error Messages On Line Fuser is not properly installed Press the on Line button First … Service & SupportAdditional OKI Resources