Oki 2024E manual On Line

Page 41

Error Messages (cont.)

SET XXX ON MPTRAY

AND PUSH ON-LINE SWITCH

The Problem

The printer has received a job for printing from the Multi-Purpose Tray and no media is loaded in the tray.

What to Do

Load the requested media (XXX) in the Multi-Purpose Tray, then press

ON LINE.

t NEAR END

The Problem

Appears on the second line of the display to indicate that the media in tray t is almost out.

What to Do

Load more media in the tray before printing any large print jobs from that tray.

REMOVE THE PAPER 480: STACKER FULL

The Problem

The stack of paper in the top (face down) output tray is blocking the printed sheets trying to exit the printer.

What to Do

Remove the stack of printed sheets from the top output tray.

REMOVE THE PAPER

nnn: TRAY X UNSUITABLE SIZE

The Problem

The paper in Tray X (e.g., 450: TRAY

1)is not a size that can be fed through the tray.

What to Do

Replace the paper in the tray with an appropriate size.

40

Image 41

Contents Page Contents Order Numbers Ordering Replacement SuppliesHow to Order Default Media Settings Media SettingsWhy Change Media Settings? Ranges for Printer Media Weight Settings Media Settings for Individual Print JobsTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Trays 1, 2To Set Transparencies as the Default Media Then, Set the Media Type Changing Default Media Settings Multi-Purpose MP TrayFirst, Check/Set the Media Size to Letter Default or A4 To Set Labels or Heavy Paper as the Default Media Changing Default Media Settings Multi-Purpose TrayThen, Set the Media Weight First, Check/Set the MediaSizes must be defined in driver before printing Loading Media Trays 1, 2Loading Media Multi-Purpose MP Tray Selecting/Using Paper Default SpecificationsMaking Transparencies the Default Print Media Selecting/Using TransparenciesPrinting Transparencies For Individual Print Jobs on TransparenciesMaking Labels the Default Print Media for the MP Tray Selecting/Using LabelsLabel Parameters Printing LabelsSample Ream Label Selecting/Using Thick MediaParameters Printing Thick PaperMaking Envelopes Default Print Media for MP Tray Selecting/Using EnvelopesPrinting Envelopes To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Secure Print Feature Ideas for Using Printer FeaturesProof & Print Feature Overlays FormsTo Delete Document before Printing It To Print a Confidential Document Using Control PanelSecure Print Proof & Print To Print a Proofed Document Using Control PanelPrinting the File List Printing the Menu Defaults MenuMapPrinting Built-In Reports Printing Lists of Fonts Printing the DemoPower Save Setting Power Save ParametersSetting the Power Save Interval To Disable/Enable Power SaveOn Line Button Control Panel ButtonsMenu Button Item Button Item + ButtonValue + Button Value ButtonError Mode Attention light blinking Cancel ButtonSelect Button Printer On LineReady LED Green Control Panel LightsJam Clearing Media JamsCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside If the sheet is inside and caught in the fuser Jam 382Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Off Changing Toner CartridgesToner Cartridge Order #s Back On Error Messages On Line Fuser is not properly installed Press the on Line button Additional OKI Resources Service & SupportFirst …