Oki 2024E manual Ideas for Using Printer Features, Secure Print Feature, Proof & Print Feature

Page 18

Ideas for Using Printer Features

Note: For detailed information on these features, see your on-line User’s Guide

Secure Print Feature

Ideal for printing confidential documents on a network system.

Idea!

When printing special media, use this feature to prevent documents being sent by other clients on the network from printing on your media:

•Create your document and store it in the printer’s memory.

•Load the special media.

•Start printing the document by accessing it through the front panel (see page 18).

Proof & Print Feature

Use Proof & Print to proof your document before printing multiple copies.

For the latest information and ideas for your printer, go to

my.okidata.com.

Overlays (Forms)

Note: Overlay elements must be created in your software application, then sorted on the printer’s hard drive using OKI Storage Device Manager before they can be used.

Great for adding logos, addresses, letterheads, etc., to your document, in any combination.

Ideas!

Use overlays:

•in place of pre-printed stationery.

•to create forms from pre-stored modular pieces.

Share Your Ideas!

Have you been using your OKI color printer’s features in a creative way?

Please share your ideas with us!

•Go to my.okidata.com and click Contact Us.

•Write us at:

Training & Publications Dept.

Oki Data Americas, Inc.

2000 Bishops Gate Blvd.

Mt. Laurel, NJ 08054-4620

USA

17

Image 18

Contents Page Contents Ordering Replacement Supplies How to OrderOrder Numbers Media Settings Why Change Media Settings?Default Media Settings Media Settings for Individual Print Jobs Ranges for Printer Media Weight SettingsChanging Default Media Settings Trays 1, 2 To Set Transparencies as the Default MediaTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Multi-Purpose MP Tray First, Check/Set the Media Size to Letter Default or A4Then, Set the Media Type Then, Set the Media Weight Changing Default Media Settings Multi-Purpose TrayTo Set Labels or Heavy Paper as the Default Media First, Check/Set the MediaLoading Media Trays 1, 2 Sizes must be defined in driver before printingLoading Media Multi-Purpose MP Tray Selecting/Using Paper Specifications DefaultPrinting Transparencies Selecting/Using TransparenciesMaking Transparencies the Default Print Media For Individual Print Jobs on TransparenciesLabel Parameters Selecting/Using LabelsMaking Labels the Default Print Media for the MP Tray Printing LabelsParameters Selecting/Using Thick MediaSample Ream Label Printing Thick PaperPrinting Envelopes Selecting/Using EnvelopesMaking Envelopes Default Print Media for MP Tray To Print an Individual Job on EnvelopesSelecting/Using OKI Print Media Proof & Print Feature Ideas for Using Printer FeaturesSecure Print Feature Overlays FormsTo Print a Confidential Document Using Control Panel Secure PrintTo Delete Document before Printing It To Print a Proofed Document Using Control Panel Proof & PrintPrinting the Menu Defaults MenuMap Printing Built-In ReportsPrinting the File List Printing the Demo Printing Lists of FontsSetting the Power Save Interval Setting Power Save ParametersPower Save To Disable/Enable Power SaveControl Panel Buttons Menu ButtonOn Line Button Value + Button Item + ButtonItem Button Value ButtonSelect Button Cancel ButtonError Mode Attention light blinking Printer On LineControl Panel Lights Ready LED GreenClearing Media Jams JamCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside Jam 382 If the sheet is inside and caught in the fuserOpen Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Changing Toner Cartridges Toner Cartridge Order #sOff Back On Error Messages On Line Fuser is not properly installed Press the on Line button Service & Support First …Additional OKI Resources